Accessories
46Pages

Solid carbide drilling Indexable insert drilling Reaming and Countersinking Spindle Tooling Taps and thread formers Circular and Thread Milling Thread turning Solid drilling and bore machining Turning Tools Grooving Tools Miniature turning tools HSS Milling Cutters Solid Carbide milling cutters Tool Clamping Milling tools with indexable inserts Material examples and article no. index

Content Overview Cylindrical Morse taper shank Morse taper chuck adapter and reduction sleeve Drill chuck with internal taper Tap clamping sleeve for Weldon adapters Extension for Shell mill arbors Extension with ABS Connection Short drill chuck NC 2010 Synchro quick change tapping chuck with minimum length compensation Quick change tapping chuck with length compensation Milling adapter ring Hydraulic chuck Micro-Precision Collet Chuck Zeta® Lock nuts and accessories Reduction sleeve and reducing bushings Centro-P precision collet chuck ER-Mini Assembly device for SK, HSK and PSC adapters...

Accessories Drill chuck WNT \ Standard Drill chuck ▲ for manual and key clamping ▲ through-hardened and ground Scope of supply: Holder with clamping key Spare parts DCONWS Suitable adapters Chapter 16 Adapters, Page 43+79. 17|3

Drill chuck adapter DIN 238 ▲ through-hardened and ground Reduction sleeve DIN 2185 ▲ through-hardened, ground internally and externally

Short drill chuck ▲ bidirectional ▲ torque moment = 12 Nm ▲ with Morse taper Scope of supply: Holder with clamping key

Short drill chuck ▲ bidirectional ▲ torque moment = 12 Nm ▲ with cylindrical shank Scope of supply: Holder with clamping key

Synchro quick change tapping chuck with minimum length compensation ▲ for collets according to DIN 6499 ▲ with length compensation under tension and under compression (LZD) ▲ pmai. = 50 bar ▲ SZID = for tool size cutting range Insert for synchro quick change tapping chuck with minimum length compensation Scope of supply: Includes lock nut ▲ SZID = for tool size cutting range

Quick change tap chuck with length compensation ▲ with cylindrical shank ▲ with length compensation under tension and compression (LZD) ▲ Quick change adapters ▲ SZID = for tool size DCONMS cutting range DIN 228B - Quick change tap chuck with length compensation ▲ with Morse taper shank ▲ with length compensation under tension and compression (LZD) ▲ SZID = for tool size

Clamping sleeve for taps in Weldon chucks ▲ for machines with rigid tapping ▲ for safe clamping of taps

Shrink fit extension ▲ For solid carbide and HSS shanks with h6 tolerance or better ▲ DRVS = Key size of the adjustment screw minimum clamping depth in Chapter 16 Adapters, Page 233.

Hydraulic expansion extension especially for Hydraulic Chucks ▲ For solid carbide and HSS shanks with h6 tolerance or better Scope of supply: Base body with backstop screw and pressure screw Note the minimum clamping depth in Chapter 16 Adapters, Page 233. Spare parts

Micro-precision collet chuck ▲ bidirectional ▲ for speeds up to 60,000 1/min. Scope of supply: Holder including clamping wrench SW 2 x 60 mm

AccessoriesDIN 1835 - cylindrical shank Micro-extension ▲ for shanks with lateral claming flat to DIN 6535 HB / 1835 B ▲ with option for Synchro-Plus tapping (available on request) Scope of supply: Holder with shank clamping screw 1) only pre-balanced design

Mini ER precision collet chuck ▲ maximum clamping range covered according to ISO tolerance field H10 ▲ roll key required for clamping Scope of supply: Holder without nut, without backstop © LSCX = clamping depth without back stop screw for shanks l2 = with back stop screw 1, dimension in brackets ( ) = with back stop screw 2 dimension OAL when using tightening nuts with seals 4 mm longer cuttingtools.ceratizit.com The transferable torques Chapter 16 Adapters, Page 233.

ER collet chuck with mini clamping nut ▲ with cylindrical shank ▲ with cylindrical shank and clamping flat

Spare parts for ER collet chuck with mini lock nut ER Mini clamping key Spare parts Article no. ER Collet Chuck ▲ with cylindrical shank and clamping flat Spare parts Article no. Article no. Article no.

Cylindrical milling bar for cutters with threaded end LB 1 — Milling bar for cutters with threaded end (Weldon) DCONMSh mm 12 12

Screw-in adapter with cylindrical shank ▲ vibration-damped

Extensions for milling cutters with threaded end THSZWS THSZMS Reductions for milling cutters with threaded end THSZWS THSZMS

Threaded shrink adapter & 0,003 A

Accessories Adapter Morse taper milling bar for cutters with threaded end

MultiChange Programme Overview The highly stable "MultiChange" exchangeable head system enables an extremely fast tool change. Designed to be durable and for a very high radial run-out accuracy, this exchangeable head system is probably the most stable and precise exchangeable head system on the market. The following chapters contain suitable exchangeable heads for almost every application. Solid carbide drilling ▲▲ Solid Carbide NC Spot Drill → Chapter 2, Solid carbide drilling *ZEFP = Number of teeth Through hole reamers Blind hold reamers Ø 8–30.2 mm incl. special diameters / ZEFP 4-6 Ø...

MultiChange - Holders ▲ tapered 87° ▲ SZID = Coupling Size Scope of supply: Holder without mounting key Solid carbide HA | II Y8 Article no. 84 005 ... £ Solid carbide Solid carbide HA | II ha I fi Assembly instructions

MultiChange - Holders ▲ cylindrical ▲ only suitable for milling ▲ SZID = Coupling Size Scope of supply: Holder without mounting key Steel Steel Steel Steel Assembly instructions

MultiChange - Holders ▲ cylindrical ▲ only suitable for milling ▲ SZID = Coupling Size Scope of supply: Holder without mounting key Assembly instructions

Extension for Shell mill arbors ▲ variable applications through usage of one or two extensions (max. 2 x 50 mm possible) Scope of supply: Holder without clamping screw Accessories Adapter using two extension pieces (max. 2x50 mm) please use a tightening bolt with a length of 125 mm.