Solutions for miniaturizing trends in microelectronics

Lasering – go for highest precision Doing more with less: The ongoing miniaturization drives us to the next generation of electronic components. CeramTec has over 40 years experience in laser machining and is one of the biggest laser-houses worldwide. This allows us to produce a wide range of contour geometries, drill hole combinations, through holes and break lines without the need for time-consuming and costly tooling. Computer-controlled lasers are used for scribing, cutting, drilling and structuring of ceramic substrates to extremely small tolerances. CeramTec’s lasering-capabilities: • complex...

CeramTec – your qualified partner for the electronics industry CeramTec is one of the world’s biggest international manufacturers of ceramics for advanced applications. The company has an over 100-year history and specializes in the development, production and customer support of innovative products made from ceramic materials. It is also a systems integrator for customers from the fields of electronics, medical engineering, automotive engineering, energy and environment and mechanical engineering. More than 3,600 Employees are worldwide active at production sites in Europe, USA and Asia. CeramTec...

• High Power/Thin film Chip Resistor • Micro holes • Complex structures • No residues on the surface (no glass) Ra < 1 pm surface roughness

Standard Length an width at nominal thickness < 0.635 mm Distance from edge to snap-line/hole center Distance between snap-lines/hole center Overall camber (measured between parallel plates, 45°) at nominal thickness > 0.63 mm Standard: 0.3% of length Premium: 0.2% of length quoted upon request within outside dimension tolerance within outside dimension tolerance

CeramTec-Weg 1 95615 Marktredwitz Germany Telefon +49 (0) 9231.69-453 Email [email protected] Web www.ceramtec-group.com The measured values mentioned before were determined for test samples and are applicable as standard values. The values were determined on the basis of DIN-/DIN-VDE standards and if these were not available, on the basis of CeramTec standards. The values indicated must not be transferred to arbitrary formats, components or parts featuring different surface qualities. They do not constitute a guarantee for certain properties. We expressly reserve the right to make technical...