Heat Exchangers
12Pages

Carbonite®Heat Exchangers CEPIC sas, 445 rue Noyer des Bouttières, 76800 Saint Etienne du Rouvray - France Tél: +33 2 32 82 37 82 - Fax: +33 2 32 82 37 88 - www.cepic.eu - cepic@cepic.

ABOUT CEPIC VERTICAL EXCHANGER TYPE EV HORIZONTAL EXCHANGER TYPE EH CUBIC SECTION EXCHANGER, TYPE ESC OTHER INFORMATION

ABOUT CEPIC Specialist since 1958 in the manufacture of anticorrosion chemical engineering equipment, CEPIC offers its customers a wide range of products: S Centrifugal pumps in graphite and plastics S Systems and skids (dilution of H2SO4, treatment of HCl, ejectors, vacuum units S Made-to-specification machined parts in graphite S Graphite rupture discs S Heat exchangers in impregnated artificial graphite, Carbonite® Through our close collaboration with our clients, we have developed an incomparable amount of know-how in the field of hydraulic, thermal and mechanical sizing. Our knowledge...

ABOUT CEPIC CEPIC, specialist in graphite heat exchangers SOLIDITY Our exchangers are manufactured in Normandy, in St. Etienne du Rouvray, 120 km north-west of Paris. Our recently-built factory has the highest-level technology for impregnating and machining, and our teams have extensive experience. This combination of know-how and state-of-the-art technology allows us to produce robust heat exchangers with particularly low carrying costs. REACTIVITY Our Engineers are always available to help you in sizing the heat exchangers that will respond to your needs. As part of our full service...

Due to its remarkable qualities, the impregnated artificial graphite, Carbonite®, is an ideal material for the manufacture of heat exchangers: o Excellent resistance to corrosive fluids o Thermal conductivity that is 3 to 10 times greater than metals o Electrical conductivity that is secured for use in an ATEX area o Low linear dilatation coefficient o Resistant to temperatures up to 170°C All parts of CEPIC heat exchangers that are in contact with corrosive fluids are made of Carbonite®, or in other corrosion-resistant materials (PTFE, PP, PDVF, coated steel) Our know-how allows us to...

Construction Cylindrical bloc Carbonite® heat exchangers Vertical fitting Steel or specific metals service envelope Design and construction in conformity with PED 97/23/EC Capacities Other specifications available upon request Uses Condensing Cooling Heating Evaporation Absorbing Adva ntages Robust Carbonite® blocs Greater available floor space Large surface area possible by bloc stacking Possibility of multiple passes Adapted to high flow rates Ma i n o p t i o n s Construction with cable glands or dilatation compensator Internal anticorrosion coating of the service envelope Thermal...

Capacities Max service pressure Other specifications available upon request Adva ntages Heavy-duty Carbonite® bloc Greater available vertical space Single bloc thus limited number of joints Multiple passes Natural condensate draining on the service side Construction with cable glands or dilatation compensator Internal anticorrosion coating of the service envelope Thermal insulation of the outer envelope Specific construction for use in ATEX zones

Cubic bloc Carbonite® heat exchangers Horizontal or vertical fitting Steel or cast iron service plates Design and construction in conformity with PED 97/23/EC Graphite collectors with vertical or horizontal taps. (phases separation). Stainless steel service plates Inclined supporting structure Specific construction for use in ATEX zones Adva ntages Heavy-duty Carbonite® blocs Easy separation of two phases fluids at the exit of the heat exchanger Bloc length from 200 to 610 mm Modular, single or multi-bloc designs Multiple passes Other specifications available upon request. Acid vapor...

Construction Cubic bloc Carbonite® heat exchangers Vertical fitting Graphite, steel, PP or PVDF service plates Design and construction in conformity with PED 97/23/EC ) Other specifications available upon request Uses Cooling Heating Avantages Robust Carbonite® blocs High thermal efficiency even with small flows thanks to multipass design Bloc length from 200 to 600 mm Allows for thermal exchange between two corrosive fluids Multiple passes Adapted to large and small temperature variations Specific construction for use in ATEX zones

ales , Swansea Cardiff i Barnstaple Exeter Reading s~"'r;S..moo.b urnemouth elfish Channel Guernsey Jersey ^s;odo,t Vj'KL-' o oGeet y/Noio Gento £J3 Koln Be\g«e "N °'^lBetg»que} Fran “Efel9Wjrn yyi e S>,-Quent. v^^Sarbrucken Breisgau -Konsi Angers Tours By car Paris, Highway A13, exit 22. By train from St Lazare -> Oissel Other CEPIC equi pment available: - Anticorrosion centrifugal pumps in Carbonite® or plastics, Systems and skids (dilution of H2SO4, treatment of HCl, ejectors, vacuums - Standard or made-to-specifications stirrers and shakers ai.lilia ^ - Machined to specification...

Anticorrosion equipment since 1958 CEPIC sas, 445 rue Noyer des Bouttières, 76800 Saint Etienne du Rouvray - France Tél: +33 2 32 82 37 82 - Fax: +33 2 32 82 37 88 - www.cepic.eu - cepic@cepic.fr