1. Catalogs
  2. CENTER TECHNOLOGY
  3. Center 20 clamp meter

Center 20 clamp meter

Center 20 clamp meter

Product catalog summary
General Specifications:
The device features a 3 3/4 digital liquid crystal display (LCD) with a maximum reading of 3999. It includes a low battery indication and a sampling rate of 2 times per second. The power source consists of two 1.5V size AAA batteries, and it has an auto power-off feature after 10 minutes. The operating temperature range is 0℃ to 40℃ with humidity below 80% RH, while the storage temperature range is -10℃ to 60℃ with humidity below 70% RH. The jaw opening diameter is 25.4 mm, and the dimensions are 203(L)×75(W)×32(H)mm with a weight of approximately 262g. Accessories include batteries, a test lead, and an instruction manual.
Electrical Specifications:
The clamp meter is rated CAT III 600V. It supports DCV and ACV autorange with specific ranges, resolutions, and accuracies. The DCV range is 400V with a resolution of 0.1V and 600V with a resolution of 1V, having an accuracy of 1% + 3 and an input impedance of 1MΩ. The ACV range is similar but with an accuracy of 1.2% + 3. The ACA autorange supports 40A with a resolution of 0.01A and 400A with a resolution of 0.1A, with an accuracy of 1.9% + 3 for 50Hz~60Hz and 3.0% + 5 for 60Hz~400Hz. The Ohm range is 400Ω with a resolution of 1Ω and an accuracy of 1% + 2. Continuity is tested with a maximum test voltage of -1.5V DC and overload protection up to 600Vrms.
Product Highlights:
The CENTER 20 clamp meter is designed to offer high value at a lower price without compromising performance. It is robust, reliable, and suitable for general electricians or equipment installers. It is safe to use with a 600V CAT III rating.
See more

Catalog excerpts

Center 20 clamp meter-1

CLAMP METER We optimized the cost to sell for less but never wanted to sacrifice any performance. The new CENTER 20 is built on quality. It is robust and reliable. The basic clamp meter functions with AC current measurement are more than proficient for most of general electricians or equipment installers in the field. Also, it's rated 600V CAT III, it's safe to use. GENERAL SPECIFICATIONS Numerical Display: 3 3/4 digital liquid crystal(LCD), Maximum reading 3999. Low Battery Indication: The is displayed. Sampling Rate: 2 Times/sec Power Source: 1.5V size AAA battery x 2 Auto Power Off: 10 minute. Operating Temperature and Humidity: 0℃ to 40℃(32℉ to 104℉); < 80%RH Storage Temperature and Humidity: -10℃ to 60℃(14℉ to 140℉); < 70%RH Jaw Opening Diameter: 25.4 mm Dimensions: 203(L)×75(W)×32(H)mm Weight: Approx.262g Accessories: Batteries, Test Lead, Instruction Manual. ELECTRICAL SPECIFICATIONS DCV (Autorange) Range Input Impedance Overload Protection Input Impedance Overload Protection Overload Protection Input Impedance Overload Protection ~Lower Price Tag comes with the Highest Value~ Active Region Overload Protection * The specifications and other information in this catalogue are subject to c h a n g e without prior notice. 4/F., NO.415, Jung-Jeng Rd., 238 Shu-Lin , Taipei, Taiwan TEL: 886-2-26763926 E-Mail : [email protected] FAX: 886-2-26763925 http : //www.centertek.com

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.