CENO Through hole Slip Ring ECN100-06P2-08P1

Product catalog summary

Product Overview: The ECN100-06P2-08P1 is a through bore slip ring from CENO Electronics, designed for mounting on target machines with a shaft passing through its hole. It utilizes fiber brush technology for reliable contact between rings and brushes.

Features:

Supports both power and signal transmission.
Capable of integrating various signals.
Offers high reliability and long life.

Applications:

Automation equipment.
Amusement and construction engineering.
Industrial motion simulators.

Optional Customizations:

Circuit number.
Current rating.
IP protection grade.
Signal type.

Specifications:

Current: 6*15A, 8*5A.
Rating Voltage: 220VAC/24VDC.
Electrical Noise: ≤70mΩ at 50rpm.
Dielectric Strength: ≥500VAC at 50Hz.
Insulation Resistance: ≥500MΩ at 500VDC.
Through Bore Size: Ø100mm.
Protection Grade: IP54.
Working Speed: 0~60rpm.
Contact Material: Precious metal.
Housing Material: Aluminum alloy with sandblasting oxidation, black.

Catalog excerpts

CENO Through hole Slip Ring ECN100-06P2-08P1-1

CENO Electronics Technology Co.,Ltd ECN100-06P2-08P1 Through hole Slip Ring ECN is defined as through bore series slip ring in CENO products.The hole is designed for passing a shaft when mounting it on the target machine.The contact of this series swivel adopts fiber brush technology which make contacts on each ring are multiple points to ensure the safe contact between rings and brushes. Life of slip ring depends on the working environment and condition,such as operation speed and continual working time.Welcome to contact us with your special demands. Features ♦ Support power and signal transmitting ♦ Integrate various signal ♦ High reliability,long life ♦ Amusement,construction engineering ♦ istrial Motion simulator Optional ♦ Circuit number ♦ Current rating ♦ IP protection grade ♦ Signal type stator side stator wire hsatshrnkal SOnmri

Open the catalog to page 1