CENO Through Hole Slip Ring ECN060

Product catalog summary

Overview: The ECN060 Through Hole Slip Ring by CENO Electronics Technology Co., Ltd is designed for applications requiring signal and power transfer in compact spaces with a through hole for shafts or other feed-throughs. It features a modular design for flexibility in package size, circuit count, and power/signal circuit mix.

Features:

Easy installation with a center hole, compatible with hydraulic, pneumatic, fiber optical, and RF rotary joints.
Low friction and torque, ensuring long life and smooth rotation.
Capable of transmitting data and analog signals, compatible with data bus protocols.

Applications:

Radar antennas and motion simulators.
Construction engineering.
Robotics and packaging equipment.
Lithium battery equipment.

Options:

Customizable through hole size.
Various circuit and current ratings.
Different installation methods.
IP protection grade options.

Specifications:

Available circuits: 6, 12, 18, 24 or more.
Current per circuit: 5A, 10A, 15A.
Voltage: 380VAC.
Electrical noise: ≤70mΩ at 50rpm.
Dielectric strength: ≥1000V at 50Hz.
Insulation resistance: 1000MΩ at 500VDC.
Operating speed: 300rpm or higher.
Operating temperature: -20 to +60°C.
Through bore size: 60mm.
IP protection grade: IP54.
Lead wire sizes: 5A - 22AWG Teflon, 10A - 17AWG Teflon, 15A - 14AWG Teflon.

Outline Drawing: The document provides a formula for calculating the length (L) in mm based on the number of circuits and current rating, with specific values for 6, 12, and 18 circuits.

Catalog excerpts

ECN060 Through Hole Slip Ring Through bore slip rings is ideally suited for applications where signals and power need to be transferred in a compact space and a through hole is required to pass a shaft or other feed through. ECN series uses a modular design that allows for unprecedented flexibility with respect to package size, circuit count and mix of power and signal circuits. Standard units can be supplied with bore diameters from 2 mm to 1500 mm, with larger diameters available as custom solutions. ECN series uses CENO's advanced bundle brush technology to greatly increase service life and optimize transmission stability. Features ♦ Center hole is easy to install,as well as integrate hydraulic,pneumatic,fiber optical,RF rotary joint ♦ Low friction, long life,Low torque, smooth rotation ♦ Transmit data and analog signal,compatible with data bus protocol Applications ♦ Radar antenna ,motion simulator ♦ Construction engineering ♦ Robot,package equipment ♦ Lithium battery equipment Optional ♦ Through hole size ♦ Circuit ,current rating ♦ Installation way ♦ IP protection grade

Open the catalog to page 1

CENO Electronics Technology Co.,LtdOutline Drawing Rotor Side Stator Side Rotor wires Stator Wires ■ Aluminum Collar Rina With 4sets Screws For Shaft Mourt

Open the catalog to page 2