CENO Through Hole Slip Ring ECN050-18P3

Product catalog summary

Overview: The ECN050-18P3 is a through hole slip ring designed by CENO Electronics Technology Co., Ltd. It features a hollow shaft that allows for the routing of hydraulic, pneumatic, or main shaft mounting. The slip ring utilizes bundle fiber brush technology for enhanced contact and reduced abrasion.

Features:

Supports both power and signal transmission.
Capable of integrating various signal types.
Offers high reliability and long operational life.

Applications:

Automation equipment.
Amusement and construction engineering.
Medical treatment devices.

Options:

Customizable circuit number.
Adjustable current rating.
Different IP protection grades available.
Various signal types can be integrated.

Specifications:

Current: 18 circuits at 15A each.
Voltage: 380VAC.
Electrical noise: Maximum 70mΩ at 50rpm.
Dielectric strength: ≥1000V at 50Hz.
Insulation resistance: 500MΩ at 500VDC.
Operating speed: 0 to 300rpm.
Contact material: Precious metal.
Operating temperature: -20°C to +60°C.
Through bore size: Ø50mm.
Protection grade: IP54.

Catalog excerpts

CENO Through Hole Slip Ring ECN050-18P3-1

CENO Electronics Technology Co.,LtdECN050-18P3 Through Hole Slip Ring Hollow shaft slip ring is one name of though hole slip ring.The unobstructed bore through the center provides routing room for hydraulic,pneumatics or for a main shaft mounting.CENO's through hole slip ring feature bundle fiber brush technology which offers multiple points of contact force per fiber bundle and low contact abrasion rates.In additional to this,the contact brush and rings are not required lubricant to reduce its wear debris. Features ♦ Support power and signal transmitting ♦ Integrate various signal ♦ High reliability,long life Applications ♦ Automation equipment ♦ Amusement,construction engineering ♦ Medical treatment Optional ♦ Circuit number ♦ Current rating ♦ IP protection grade ♦ Signal type rotor side stator side io'bws for Enah riDun‘

Open the catalog to page 1