CENO Through Hole Slip Ring ECN025-18P2-26S

Product catalog summary

Product Overview: The ECN025-18P2-26S is a Profi-Bus slip ring designed by CENO Electronics Technology Co., Ltd. It is engineered to transmit various signals including RS, NET, and other serial port and bus signals, while also supporting the simultaneous transmission of servo motor current and encoder control signals.

Key Characteristics:

Integration of multi-signal and current transmission.
Compliance with EMC compatibility standards to prevent interference between current and signal.

Options Available:

Circuit customization.
Protection grade adjustments.
Signal type variations.
Different installation methods.

Applications: Suitable for use in automation equipment and motion simulation test equipment.

Technical Parameters:

Circuit: 18 channels at 10A, 4 servo motor encoder signals, 8 sensor signals, and 2 reserved channels.
Protection Grade: IP54.
Rating Voltage: 380VAC.
Working Temperature: -20°C to +60°C.
Insulation Resistance: 500 MΩ at 500VDC for power, 100 MΩ at 300VDC for signal.
Working Humidity: 60% RH.
Dielectric Strength: ≥1000V at 50Hz for power, ≥300V at 50Hz for signal.
Rotating Speed: 0 to 300 rpm.
Resistance Fluctuation: 70mΩ.
Contact Material: Precious metal.
Diameter: Ø25.4mm.
Housing Material: Aluminum alloy with white oxidation.

Catalog excerpts

CENO Through Hole Slip Ring ECN025-18P2-26S-1

SLIP RING CENO Electronics Technology Co.,Ltd Profi-Bus Slip Rings--ECN025-18P2-26S ■ Transmit various signals such as RS, NET and other serial port and bus signals; ■ Simultaneously transmit servo motor current and encoder control signals ■ Multi-signal and current could be integrated ■ Comply with EMC compatibility, without interference between current and signal Option ■ Circuit ■ Protection grade ■ Signal type ■ Installation way Application ■ Automation equipment Motion Simulation test equipment

Open the catalog to page 1