CENO Slipring assembly set with 127mm hole ECN127-10P1

Product catalog summary

Product Overview
The ECN127-10P1 Slipring assembly by CENO Electronics Technology Co., Ltd features a large bore size of 127mm, allowing a shaft with a maximum diameter of 127mm to pass through. It includes four screw holes for fastening the slip ring shaft to the rotation axis, enabling the rotor part to rotate with the axis. The stator side is equipped with adaptable anti-rotation tabs, which can be customized in length or shape, or replaced with anti-rotation pins if necessary.

Features

Flying lead wire
Aluminum alloy housing
Teflon lead wire

Applications

Filler
Automation
Sewage treatment

Optional Features

Spinning speed
Line number
Enclosure material

Specifications

Circuits & Current: 10x 5Amp
Voltage: 0~115VDC
Electrical noise: Max 30mΩ (50rpm)
Dielectric strength: ≥ 500V@50Hz
Insulation resistance: ≥ 500MΩ@500VDC
Operating speed: 0-350 rpm
Contact material: Precious metal
Housing material: Aluminium alloy
Working temperature: -20℃~+60℃
IP protection grade: IP51
Through hole size: 127mm

Catalog excerpts

CENO Slipring assembly set with 127mm hole ECN127-10P1-1

CENO Electronics Technology Co.,Ltd ECN127-10P1 Slipring assembly set with 127mm hole This slip ring has large bore size 127mm.It allows shaft with diameter max. 127mm go through the hole and there are 4 screw holes for fastening slip ring shaft on rotation axis so rotor part can rotate together with the axis.On the stator side,there are two adaptable anti-rotation tabs for fixing.Anti rotation tab size can be designed longer or shorter,even special shape according to site using requirement.It also could be replaced by anti-rotation pins if necessary. Features ◆ Flying lead wire ◆ Aluminum alloy housing ◆ Teflon lead wire ECN127-10P1 Applications ◆ Filler ◆ Automation ◆ Sewage treatment Optional ◆ Spinning speed ◆ Line number ◆ Enclosure material Picture Circuits & Current Voltage Electrical noise Dielectric strength Insulation resistance Operating speed Contact material Housing material Working temperature IP protection grade Through hole size 0-350 rpm Precious metal Aluminium alloy -20℃~+60℃ IP51 127mm Outline Drawing

Open the catalog to page 1