CENO Rotary connector with 60mm center hole ECN060-06P3

Product catalog summary

Product Overview: The ECN060-06P3 is a through-hole industry slip ring developed by CENO Electronics Technology Co., Ltd. It is designed for use in automatic systems requiring continuous rotation while transferring electrical power, data, or other signals between stationary and rotating structures. The slip ring features a 60mm inner bore and supports 6 wires with a 15A electrical power signal capacity.

Specifications:

Current & Circuits: 6 Circuits * 15A
Rating Voltage: 380VAC
Dielectric Strength: ≥1000VAC@50Hz
Insulation Resistance: 500MΩ@500VDC
Lead Wire Size: AWG17# Wire Teflon® UL
Lead Wire Length: Rotor and Stator - 300mm each
Contact Resistance: ≤70mΩ (50rpm)
Working Speed: 0~300 rpm
Contact Material: Precious metal
Housing Material: Aluminum alloy sandblasting oxide black
Working Temperature: -20℃~+60℃
Working Humidity: 60%
Protection Grade: IP54
Installation: Stator end fixed on the main shaft with 4 screws
Through Hole Size: Ø60mm

Features:

Stable data transmission with no packet loss and low return loss
Low error rate and super high signal-to-noise ratio (SNR)
Hybrid solutions available combining power, digital signal, fiber optic, and gas-liquid

Applications:

Automatic equipment
Charging piles
Industrial automatic control

Optional Customizations:

Circuit number & current rating
Working speed
Connector type
IP protection grade

Catalog excerpts

CENO Rotary connector with 60mm center hole ECN060-06P3-1

CENO Electronics Technology Co.,Ltd ECN060-06P3 Through hole industry Slip Ring ECN060-06P3 is a through hole industry slip ring in CENO electrical company, it can be used in any automatic system that require continuous, unrestrained rotating while transfer electrical power, date or other signals from a stationary to a rotating structure. This through hole industry slip ring inner bore size is 060mm, 6 wires of 15A electrical power signal. It can be working stably at the temperature from -20°C to +60°C, and easy to install that the stator end fixed on the main shaft with 4 screws. Compare with other slip rings CENO’s through hole slip ring is more economical and practical. According to different requirements from customers for electrical, signal and different power parameter requirements, CENO will provide the best solution to save your time energy and cost. Applications ♦ Automatic equipment ♦ Charging pile ♦ Industrial automatic control Features ♦ Stable data transmission,no packet loss ,low return loss, ♦ Low error rate ,super high SNR ♦ The solution can combine hybrid of power, digital signal,fiber optic,gas-liquid Optional ♦ Circuit number & Current rating ♦ Working speed ♦ Connector type ♦ IP protection grade

Open the catalog to page 1