CENO Motion simulator slip ring ECN010-36P

Product catalog summary

Product Overview: The ECN010-36P is a through bore slip ring from CENO Electronics, featuring a 10 mm hole diameter designed for shaft passage during installation on target machines. It supports high-speed operations up to 3000 rpm, making it suitable for motion simulators with single or multi-axis configurations. The slip ring uses gold-to-gold contact material for reliable connections.

Features:

Easy installation with a center hole that integrates hydraulic, pneumatic, fiber optical, and RF rotary joints.
Low friction and torque for smooth, high-speed rotation.

Applications:

Radar antennas
Packaging equipment
Motion simulators

Optional Customizations:

Through hole size
Circuit and current specifications
IP protection grade
Signal type

Specifications:

Current: 36*2A
Voltage: 240VAC
Electrical noise: ≤70mΩ at 50rpm
Dielectric strength: ≥500V at 50Hz
Insulation resistance: 100MΩ at 500VDC
Operating speed: 3000 rpm
Contact material: Gold to gold
Operating temperature: -20 to +60℃
Through bore size: 10mm
IP protection grade: IP44

Catalog excerpts

CENO Motion simulator slip ring ECN010-36P-1

ECN010-36P Through Hole Slip Ring This is our through bore series slip ring in CENO products.The hole diameter is 10 mm,it is designed for passing a shaft when mounting it on the target machine.its operating speed reach 3000rpm ,high speed and fast rotation, so it is widely used for motion simulator with single or multi axis.The inside contact material of this series swivel adopts gold to gold which make contacts on each ring are multiple points to ensure the safe contact between rings and brushes. Features ♦ Center hole is easy to install,as well as integrate hydraulic,pneumatic,fiber optical,RF rotary joint ♦ Low friction,low torque ♦ High speed and smooth rotation Applications ♦ Radar antenna ♦ Package equipment ♦ Motion Simulator Optional ♦ Through hole size ♦ Circuit &Current ♦ IP protection grade ♦ Signal type

Open the catalog to page 1