CENO Carbon brush collector ring 200A BHCN-C-50-10P-05S

Product catalog summary

Product Overview: The BHCN-C-50-10P-05S is a carbon brush collector slip ring designed by CENO Electronics Technology Co., Ltd. It integrates high current rating of 200Amp with low power and control signals into a single unit. The design includes both carbon and fiber brushes on the stator part, with a flange on the rotor side for easy rotation. The connection options include flying lead wire and connection PIN, which can be replaced by a rotation tab if needed. The outer shape is columniform and made of stainless steel, with customizable shapes available.

Features:

Lead wire & connection PIN
High power capability
Separate stator and rotor design

Applications:

Testing instruments
Drilling cranes
Robotics

Optional Customizations:

Outline shape
Contact material
Installation method

Specifications:

Circuits & Current: 45x 200Amp, 5x10Amp, 5x signal
Voltage: 0~380VAC/VDC
Electrical noise: Max 30mΩ
Dielectric strength: ≥ 1000V@50Hz (Power), ≥ 500V@50Hz (Signal)
Insulation resistance: ≥ 500MΩ@500VDC (Power), ≥ 100MΩ@500VDC (Signal)
Operating speed: 0-25 rpm
Contact material: Precious metal
Housing material: Stainless steel / aluminum alloy
Working temperature: -20℃~+60℃
IP protection grade: IP64
Through hole size: 50mm

Catalog excerpts

CENO Carbon brush collector ring 200A BHCN-C-50-10P-05S-1

CENO Electronics Technology Co.,Ltd BHCN-C-50-10P-05S Carbon brush collector High current rating 200Amp integrated low power and control signal into one collector slip ring.There are carbon brush and fiber brush on stator part.There is no through bore in the center,but flange is designed on rotor side for easy driving it rotate.Connection way has flying lead wire and connectioin PIN.The PIN could be replaced by rotation tab if necessary.The outer shape is columniform with stainless steel.It can be designed in any other shapes as per application requirement. Features ◆ Lead wire & connection PIN ◆ High power ◆ Separate stator and rotor BHCN-C-50-10P-05S Applications ◆ Testing instrument ◆ Drilling crane ◆ Robotics Optional ◆ Outline shape ◆ Contact material ◆ Installation way Picture Circuits & Current Voltage Electrical noise 0~380VAC/VDC Max 30mΩ ≥ 1000V@50Hz (Power) ≥ 500V@50Hz (Signal) ≥ 500MΩ@500VDC (Power) ≥ 100MΩ@500VDC (Signal) 0-25 rpm Precious metal Stainless steel / aluminum alloy -20℃~+60℃ IP64 50mm Dielectric strength Insulation resistance Operating speed Contact material Housing material Working temperature IP protection grade Through hole size Outline Drawing

Open the catalog to page 1