CENO Big hole slip ring with Ethernet signal ECN115-06P3-19S-01EM

Product catalog summary

Product Overview: The ECN115-06P3-19S-01EM is a large size slip ring from CENO Electronics Technology Co., Ltd, part of the ECN series known for through-bore slip rings. These slip rings allow the passage of drive shafts, gas-liquid passages, and can integrate various joints such as high frequency, fiber, and encoder connections. The product features a large inner bore of 115mm and integrates 25 rings for current rating along with a 100M Ethernet signal group.

Key Features:

Transmission of 100M Ethernet.
Large inner hole of 115mm.
Long cable length of 1500mm.
Stable transmission capabilities.

Applications:

Wind turbines.
Motion simulators.
Medical machinery.
Wrapping machinery.

Optional Customizations:

Through hole size.
Current and ring numbers.
Signal type.
IP protection grade.

Technical Specifications:

Circuits & Current: 6*15A, 17*5A, 2*6A, 1*100M Ethernet.
Voltage: 0~220VAC/VDC.
Dielectric Strength: ≥500V@50Hz (power), ≥300V@50Hz (signal).
Insulation Resistance: ≥500MΩ@500VDC (power), ≥100MΩ@100VDC (signal).
Electrical Noise: ≤30mΩ (50 rpm).
Operating Speed: 0-60 rpm.
Contact Material: Precious metal.
Housing Material: Aluminum alloy & stainless steel.
IP Grade: IP51.
Inner Hole Size: 115 mm.
Working Temperature: -20°C to +80°C.

Catalog excerpts

CENO Big hole slip ring with Ethernet signal ECN115-06P3-19S-01EM-1

CENO Electronics Technology Co.,Ltd ECN115-06P3-19S-01EM Large size slip ring CENO ECN series are through-bore slip rings,the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, wave guide, gas and liquid and other joints. The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 980mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.communication systems.Please contact with CENO if you have any special requirements about slip ring.ECN115-06P3-19S-01EM with large inner bore 115mm. Integrated 25 rings of current rating and 1 group 100M Ethernet signal . Features  Transmit 100M Ethernet  Large inner hole 115mm  Long cable length 1500mm  Stable transmission ECN115-06P3-19S-01EM Circuits & Current Voltage Dielectric strength Insulation resistance Applications  Wind turbines  Motion simulator  Medical machine  Wrapping machinery Specification Optional  Through hole size  Current & ring numbers  Signal type  IP protection grade Picture Electrical noise Operating speed Contact material Housing material IP grade Inner hole size Working temperature 0-60 rpm Precious metal Aluminum alloy & stainless steel IP51 115 mm -20°C~ +80°C Outline Drawing

Open the catalog to page 1