CENO 1.5 inch Hollow shaft slip rings ECN038-45P1

Product catalog summary

Product Overview: The ECN038-45P1 is an economical and practical electrical slip ring from CENO Electronics Technology Co., Ltd. It features a through-hole design, making it versatile and stable for various applications, including technical and industrial equipment, agriculture machinery, extractive industry, military, and ocean engineering equipment.

Specifications:

45 circuits with 5A original electrical signal.
Rating Voltage: 0~380VAC/VDC.
Dielectric Strength: 1000VAC@50Hz.
Insulation Resistance: 500MΩ@500VDC.
Lead Wire Size: AWG22 # Tin coated Teflon@UL.
Lead Wire Length: Rotor and Stator: 1000mm each.
Contact Resistance Fluctuation: ≤30mΩ at 50rpm.
Working Speed: 0~300 rpm.
Contact Material: Precious metal.
Housing Material: Aluminum alloy with sandblasting oxide black finish.
Working Temperature: -20℃ to +60℃.
Working Humidity: 60%.
Protection Grade: IP54.
Installation: Rotor end fixed on the main shaft with 4 screws.
Through Hole Size: Ø38.1mm.

Features:

Stable data transmission.
Through hole size of Ø38.1mm.
Protection grade of IP54.
Can be integrated with other signals.

Applications:

Ocean engineering equipment.
Agriculture machinery.
Industrial automatic control.

Optional Customizations:

Circuit number and current rating.
Working speed.
Inner/outer bore size.
IP protection grade.

Catalog excerpts

CENO 1.5 inch Hollow shaft slip rings ECN038-45P1-1

CENO Electronics Technology Co.,Ltd ECN038-45P1 Through hole industry Slip Ring ECN038-45P1 is an electrical slip ring without integrated other signals so it’s economical, practical, and cost effective in all products in CENO electrical company. It is a strong universality and working stably because of the through hole designs. Thought hole slip ring has wide range of application, can be wildly used on technical & industrial equipment, agriculture machine, extractive industry, military, ocean engineering equipment etc. There are 45 circuits of 5A original electrical signal in this through hole slip ring. The contact material is Precious metal and the housing material is Aluminum alloy, It can work normally in the speed of 300rpm at the temperature between -20℃ and +60℃. Features     Stable data transmission Through hole size Ø38.1mm Protect grade IP54 Can be integrated with other signals Ocean engineering equipment Agriculture machine Industrial automatic control Circuit number & Current rating Working speed Inner / outer bore size IP protection grade Current & Circuits 45 Circuits * 5A (Original Signal) Rating Voltage Dielectric Strength Insulation Resistance Lead Wire size Lead Wire length Contact resistance fluctuation value Working speed Contact material Precious metal Housing material Aluminum alloy sandblasting oxide black Working temperature Working Humidity Protect grade Rotor end fixed on the main shaft with 4 screws Ø38.1mm Through hole size Outline Drawing

Open the catalog to page 1