Vibration monitoring equipment, single/dual channel

Vibration monitoring equipment, single/dual channel Typical applications The TM1 equipment continuously measures the vibrations of rotating machines by supplying analog outputs (for interfaces to PLC or DCS) or digital outputs (alarm and trip contacts) with the display on a digital readout of the found value. The equipment can be connected to other instruments (max. 32) via serial line RS485 or to a PC (through appropriate interface) for setting and reading the stored data by the various measuring parameters. Testing of the vibration of one or two channels of any type of rotating machine (motors,...

1 or 2 measuring traducers (velocity or acceleration transducer) > 2 velocity transducers (optional) Transducers which can be used: Power supply: External connection: > Terminal board for connecting transducers (max. cable section 2.5 mm2) > Terminal board for connecting alarm contacts (max. cable section 2.5 mm2) > Terminal board for serial port RS485 > BNC connectors for connection to the analyzer Ambient temperature range: ► TM1: example of multiple application > 2 inputs, vibration transducers 2 inputs, velocity transducers > 2 inputs for TRIP MULTIPLIER and BYPASS/RESET Analog outputs: >...

The TM1 equipment is supplied according to the configuration selected by the Customer. However the setting of the operating parameters can be varied during installation of the system by using the buttons on the control panel or via serial link RS485 using a PC provided with the appropriate program. ► E: High bandpass filter V velocity transducer A acceleration transducer N.B: The low pass filter frequency should be at least double that of the high bandpass filter 23826 MANDELLO DEL LARIO (LC) Italy www.cemb.com Vibration analysis division: Order example: H: power supply 24Vdc G: output 4 : 20...