Costruzioni Elettro Meccaniche ing. Buzzi & C. S.p.a. Sede legale: Via Risorgimento, 9 23826 MANDELLO DEL LARIO - (Lecco) ITALY Cap. Società ? 1.500.000 i.v. Reg. Impr. Lecco 00221870132 C.C.I.A.A. Lecco REA 75997 Meccanografico LC 000078 C.F. 00221870132 -P.IVA IT 00221870132 Telefono +39 – 0341.706.111 Industry Div. Fax +39 – 0341.735.678 Garage Div. Fax +39 – 0341.700.725 Vibration Analysis Div. Fax +39 – 0341.706.299 www.cemb.com e-mail: [email protected] FUNCTION The transducer T6-R is used for performing the following measurements: SPEED OF ROTATION of the machine, the measurement is made by mounting the transducer next to a gear wheel (polar wheel) with a known number of teeth. PRINCIPLE OF OPERATION Transducer T6-R measures the variation in flow due to the variation of the air-gap. Such variation generates an impulsive type signal which can be processed by the CEMB instrument of series

Type of measurement Range of measurement Coil resistance Inductance Power supply Connection Casing material Range of application Weight Maintenance Drawings enclosed : Connector MIL C-5015, series 3102/16, standard kit : Brass : 14886 = Overall dimensions, mounting, connections. Refer to enclosed drawing Nr. 14886. 1) Prepare a suitable support for seating the transducer (hole dia.22.5 or M22x1). Mount the transducer so that its longitudinal axis lies perpendicular with the surface of the polar wheel and intersects the axis of rotation of the polar wheel. 2) Adjust the airgap between the surface...