VELOCITY TRANSDUCER The T1-40 transducer measures absolute vibration of any rotating machine support. It supplies a voltage proportional to the vibration speed directly interfaceable with a device that can process the signal (TR-V, TRAL-V, TM1, TDSP). The T1-40 electrodynamic transducer consists of a suspended plate coil immersed in the magnetic field of a permanent magnet. It is fastened at the point to be tested and generates a signal proportional to the vibration speed. It is used to monitor pumps, fans, motors and compressors and is available in aluminium or stainless steel. The transducer is available for the following classified area: The transducer is certified SIL2 for functional safety. (ATEX - ZONA 1) (ATEX - ZONA 0) (IECEx - ZONA 1) (IECEx - ZONA 0) Sensitivity Composition External connections Operating temperature range Type of measurement Measurement direction Measurement range Dynamic range Resonance frequency Transverse sensitivity Output impedance TECHNICAL CHARACTERISTICS ■ 21.2 mV/mm/s ■ body in anodised aluminium or AISI 316L stainless steel ■ seismic (absolute vibration) j Retaining screw Weight CEMBBALANCING MACHINES

C: CERTIFICATION 0 SAFE AREA: CE, UKCA, CSA/UL 2 tg> II 2G Ex ia IIC T6/T5/T4 Gb O II 2D Ex ia IIIC T85/100/135°C Db (ATEX - ZONA 1) 5_Ex ia IIC T6/T5/T4 Gb_Ex ia NIC T85°C/100°C/135°C Db (lECEx - ZONA 1) B_Ex ia IIC T6/T5/T4 Ga_Ex ia NIC T85°C/100°C/135°C Da (lECEx - ZONA 0) 1 STAINLESS STEEL (mandatory for zone 0) E: FIXED CONNECTOR 0 ALUMINIUM_ 1 PLASTIC (mandatory for zone 0) 5 PINS PLASTIC CASE (mandatory for zone 0)_597053127 SHIELDED CABLE ARMOURED IN ETFE 87SEB5827 CBL/T1-40 / E / 5 / XX (lenght in meters)_ WITH METAL JACKET COVERED BY PVC 99025-p ZENER BARRIER Z960 (for hazardous area)_800208960...