Automatic balancing machines for pulleys

Product catalog summary

Overview: The document provides detailed specifications and descriptions of various automatic balancing machines designed for pulleys, manufactured by Metaldyne France. These machines are used to measure and correct dynamic and static unbalance in pulleys through drilling and milling operations.

Specifications:

VEBK100/UF-A/UFO: This model measures and corrects dynamic unbalance on two planes using vertical and horizontal drilling units with pneumatic and hydraulic reactions.
VUBK50/UF/A: An automatic version with controlled axis motor for drilling depth, offering single or twin drill bit options and automatic correction radius selection.
VUBK50/UF-P: A basic model with an electro-pneumatic drilling unit, capable of simultaneous dual drilling with optional radial clamping.
VUBK50/UF-A/1ST: Features a single station for measuring and correcting static unbalance with a controlled axis drilling unit and powered chain conveyors for part handling.
VUBK50/UFA/CN: Automatic version with three controlled axes, allowing correction through drilling or milling with interpolated axis movements.
VUBK50/UFA/TG: Designed for unbalance correction by drilling or milling, with hydraulic clamping on a rotary table.

Special Applications:

VUBK30/UF-A/2ST: A two-station automatic system with a 180° double arm loader, including measuring, correction stations, and conveyors for static unbalance correction.
VUBK50/UF/CN/4ST: A four-station system with a 90° four-arm rotary loader, featuring load/unload, measuring, correction, and control stations for static unbalance correction.

Additional Features: The machines include a control unit for geometrical dimensions using optical equipment, ensuring precision in radial and lateral run-out measurements.

Contact Information: The document lists contact details for CEMB S.p.A. and its international offices, providing phone numbers, fax numbers, and email addresses for further inquiries.

Catalog excerpts

Automatic balancing machines for pulleys-1

Equilibratrici automatiche Equilibratrici automatiche per pulegge per pulegge Automatic balancing machines Automatic balancing for pulleys machines for pulleys The pieces shown on the picture are property of Metaldyne France: all rights reserved.

Open the catalog to page 1

Automatic balancing machines for pulleys-2

Equilibratrici monostazione One station balancing machines VUBK50/UF-P Versione base con foratrice elettropneumatica. Sull’unità è montata una testina che permette una doppia foratura in simultanea completa di bloccaggi radiali. (opzionale). Basic model equipped with electro-pneumatic drilling unit. The drilling unit spindle is equipped with a special device that includes a twin-drill bit and automatic operation with simultaneous radial clamping action (optional). VUBK50/UF/A Versione automatica. La profondità della foratura è controllata da un motore asse. Monopunta o doppia punta (opzionale)....

Open the catalog to page 2

Automatic balancing machines for pulleys-3

VUBK50/UFA/TG Versione per correzione tramite foratura o fresatura. Il pezzo viene staffato alla tavola rotante con dispositivi idraulici. Model designed for the unbalance correction by drilling or milling operation. The part is clamped to the rotary table by a hydraulic clamping devices. The pieces shown on the picture are property of Metaldyne France: all rights reserved. VUBK50/UFA/CN Versione automatica, 3 assi controllati. Correzione per foratura o fresatura a pezzo fisso tramite movimenti assi interpolati. Dispositivo integrato di reazione foratura. Automatic version with 3 controlled axes....

Open the catalog to page 3

Automatic balancing machines for pulleys-4

Equilibratrici più stazioni e caricatore Multi-stations balancing machines with loader VUBK30/UF-A/2ST Impianto automatico a due stazioni completo di caricatore rotativo a due bracci a 180°. Composto da stazione di misura/controllo più stazione di correzione e rulliere di ingresso/uscita pezzi con correzione automatica dello squilibrio statico mediante unità di foratura a due assi controllati. Automatic twin-stations balancing system equipped with 180° double arm loader and composed by measuring/ control station, correction station and input conveyors. Parts output with automatic correction of...

Open the catalog to page 4