EASY TO USE DOUBLE LASER UNIVERSAL INSTALLATION QUICK AND ACCURATE SOLUTION FOR BELT ALIGNMENT The new alignment AL10 uses two laser transmitters for the projection of a two laser lines. The pulley groves are used as a reference. These generated lines indicate the alignment of the transmission quickly and correctly. WHY ALIGN? Increase the machine life Increase efficiency and productivity Reduces transmission wear Reduces energy losses QUICK UNIVERSAL MOUNTING Each unit is positioned on the pulley by a strong magnet and spring clips that are centered in the pulley grooves. ALIGNMENT PROCESS The two laser units generate a line on the opposite unit. When the pulleys are correctly aligned, the lines coincide with the references centering on both units. The dual laser alignment provides greater precision and speed than single laser systems. If the belt transmission is misaligned, the line deviates from the center. TYPES OF MISALIGNMENT It is very important that the pulleys are mounted correctly on the shafts and that the shafts are straight before starting the alignment process. The oscillating or deformed sheaves severely influence the quality of the alignment. The types of misalignment are described below: Angular misalignment The shaft of the driving machine and the shaft of the driven are not horizontal. The laser beam is projected onto the opposite head with a certain angle of inclination. Parallel misalignment The shafts are parallel, but the pulleys are on different planes. The laser beam is projected on the opposite head in a parallel but with a deviation in the horizontal plane. Correct alignment The shaft of the driving machine and the shaft of the driven are parallel and stand on the same level. The laser beam is projected on the opposite head, it is parallel and centered correctly.

ACCESSORI STANDARD No. 2 Line-Laser sensors with magnetic base No. 2 Set of universal supports V-guide No. 4 Batteries LR03 1,5V (AAA) Calibration certificate Instruction manual Carrying bag OPTIONAL ACCESSORIES TECHNICAL SPECIFICATION ®CEMB BALANCING MACHINES CEMB S.p.A. Via Risorgimento, 9 23826 MANDELLO DEL LARIO (LC) Italy www.cemb.com Vibration analysis division: phone +39 0341 706111 fax +39 0341 706299 e-mail: [email protected] All the data and features mentioned in this catalogue are purely for information and do not constitute any commitment on the part of our company, which reserves the...