10-Accesories
13Pages

energy management systems

Accessories for voltage taps Voltage taps for busbars Voltage taps for roand conductors Accessories for analogue instruments Snap-in covers Blind cover with glass Mounting screws/ clips Rubber gaskets Protection covers IP65 Terminal covers Rubber grommets Mounting frames Accessories for current transformers Snap on mounting (DIN rail) Mounting feet Copper tubes Accessories for switchboards Power sockets Pin-type insulators for indoor use Connection diagram pocket

Accessories for: - voltage taps for busbars and roand conductors - analogue instruments - current transformers - switchboards

VSPL4 Terminal voltage tap for bus bar with integrated fuse The VSP of insulated busbar terminals let you connect your instruments to live busbars. A fuse holder is an integrated part of this terminal, proving you with protection at the source. The terminal can be installed directly onto the busbar using an insulated Allen key driver. This makes the installation of this unique product a one handed exercise. The fuse holder is mounted directly on the metal that makes contact with the busbar, thereby providing a secure connection with a high short circuit rating. For connection to the Netural...

• One-handed and safe tapping of voltage for measurement purposes • No tools needed • Safe mounting • Including 5x25mm, 2A fuse • For insulated 2.5-6 mm2 conductors, stranded and solid (rigid) and flexible wire In existing installations there is rarely a fused terminal available for measurement purposes. This unique tapping clamp allows you to tap a fused voltage from an insulated wire for measurement using one hand and without the need for additional tools. The fuse is mounted directly on the primary conductor, which results in an optimum degree of safety. This unique product is a...

•One-handed and safe tapping of voltage for measurement purposes • No tools needed • Safe mounting • Including 5x25mm, 2A fuse •For insulated 10-16 mm2 conductors, stranded and solid In existing installations there is rarely a fused terminal available for measurement purposes. This unique tapping clamp allows you to tap a fused voltage from an insulated wire for measurement using one hand and without the need for additional tools. The fuse is mounted directly on the primary conductor, which results in an optimum degree of safety. This unique product is a breakthrough for fast and safe...

ACCESSORIES NOTES

Available sizes (Dimensions in mm) black black black black black black black black Blind cover with glass Available sizes (Dimensions in Mounting screws / -Clips Available Available sizes (Dimensions in mm)

Available sizes (Dimensions in mm) Plexiglas with rubber frame Terminal covers Available sizes (Dimensions in mm) Rubber grommets Available sizes (Dimensions in mm) Article No. 70054-1447 Mounting Applicable Case Description by placing on the terminals to all instruments type 48, 72 and 96 non-flammable elastic plastic Mounting frames Available sizes (Dimensions in mm)

Snap on mounting (DIN rail) Mounting feet Copper - tubes Available sizes

Technical Data / Dimensions in mm Pin - type - insulators for indoor use Connection diagrams pockets Available sizes