TKA
3Pages

TECHNICAL DATA SHEET: TKA INSTALLATION PROCEDURE Nails for all materials. It can be used in different materials like: wood, concrete, steel… Compatible with AGII, FORCE ONE & FOX. Material: - Manufactured using mild steel with a hardness of 54-56 HRC. - black plastic strip. Coating: white zinc plated, minimum 5 microns. Insert on the gas nailer magazine. BASE MATERIAL AND RECOMMENDED NAIL Recommended Base Material Steel beam / support with thickness from 3mm to 6mm Precast concrete Soft concrete < 250Kg/cm2 Wood to concrete Low quality concrete block Small Things Matter C/ Roselló, 7 Pol. Ind. La Bruguera Castellar del Vallés (BCN – Spain) Tel: +34 93 715 33 33 This document is intellectual property of CELOFIXINGS Copy is forbidden and will be prosecuted. Copy, total or partial, must have the written agreement of CELOFIXINGS. F204 v.01- Technical D

TECHNICAL DATA SHEET: TKA INSTALLATION PARAMETERS AND RECOMMENDED LOADS SRANDARD CONCRETE Minimum distance between nails: 100 mm. Distance from the edge of the concrete: 75mm. STRENGTH FOR NAILS INSTALLED IN STANDARD CONCRETE TYPE OF CONCRETE Minimum depth [mm] LIGHT CONCRETE Minimum distance between nails: 100 mm. Distance from the edge of the concrete: 150mm. STRENGTH FOR NAILS INSTALLED IN LIGHT CONCRETE TYPE OF CONCRETE Minimum depth [mm] LIGHT CONCRETE THROUGH METAL STRIP Minimum distance between nails: 100 mm. Distance from the edge of the concrete: 150mm. STRENGTH FOR NAILS INSTALLED...

TECHNICAL DATA SHEET: TKA STEEL Minimum distance between nails: 25 mm. Distance from the edge: 12,5 mm. STRENGTH FOR NAILS INSTALLED IN STEEL ASTM A 572 GRADE 50 STEEL THICKNESS Minimum depth [mm] Need loads for lesser embedment too for applications using XHA 13 APPLICATIONS Fixing of accessories for installation Fixing of metal sheet, insulation boards, wood boards, channels for dry wall… Small Things Matter C/ Roselló, 7 Pol. Ind. La Bruguera Castellar del Vallés (BCN – Spain) Tel: +34 93 715 33 33 This document is intellectual property of CELOFIXINGS Copy is forbidden and will be...