Fixing of insulation boards Insulation fastener IPD Advantages IPD 8 with steel nail IPD 10 with plastic nail (glass fibre reinforced) Approvals and certificates • ETA approved for ETICS (external thermal insulation composite systems) • Suitable for fastening solid insulation boards • The textured surface of the plate provides a good bond for the plaster • Stable design and impact resistant material prevents bending when hitting in HALOGEN frei European Technical Assessment for ETICS Mounting Suitable building materials Very suitable Plug length Ld • Concrete • Solid brick • Solid sand-lime brick • Lightweight solid concrete blocks • Aerated concrete • Hollow brick • Hollow sand-lime brick • Lightweight hollow concrete blocks • Natural stone Thickness of fixture tfix Drill hole depth h1 ttol Board thickness hp Thickness of fixture tfix = Thickness of equalizing layer ttol + Board thickness hp Thickness of equalizi

IPD 8 with steel nail Type * Setting depth hef = 65 mm for aerated concrete, which reduces the thickness of fixture tfix accordingly IPD 10 with plastic nail (glass-fibre reinforced) Type * Setting depth hef = 50 mm for aerated concrete, which reduces the thickness of fixture tfix accordingly Loads Fper according to ETA Concrete C12/15 Solid sand-lime brick KS Hollow sandlime brick KSL Aerated concrete AAC2 Fper [kN] Fper: Permissible loads according to ETA assessment incl. safety factors The safety coefficients are 2,0 and 1,5 Example of anchor arrangement for polystyrene hard foam boards 800x625mm,...