Shear Beam load cell type H8Q

Product catalog summary

Applications: The Shear Beam Load Cell Type H8Q is suitable for small capacity weighing systems, including hopper scales, floor scales, and other electronic scales.

Main Features: The load cell is constructed from nickel-plated alloy steel, offering a low profile and high accuracy. It is certified with OIML Certificates (TC8382 Revision 0) and C of C Number (R60/2000-NL1-13.21 Revision 1). It has an ingress protection rating of IP67.

Nominal Load: The load cell is available in capacities of 200, 500, 1000, and 2000 Kg.

Specifications:

Accuracy Class: OIML R60 C3
Output Sensitivity: 2.0 ± 0.002 mV/V
Max Capacity: 200-2000 Kg
Max Number of Load Cell Intervals: 3000
Combined Error: ≤ ±0.023% FS
Safe Overload: 150% of Emax
Ultimate Overload: 300% of Emax
Zero Balance: ≤ ±1.0% FS
Recommended Excitation Voltage: 5 ~ 12 V
Max Excitation Voltage: 18 V
Terminal Resistance: 1000 ± 10 Ω
Insulation Impedance: ≥ 5000 MΩ at 50VDC
Compensated Temperature Range: -10 ~ +40°C
Operating Temperature Range: -35 ~ +70°C
Storage Temperature Range: -40 ~ +80°C
Recommended Torque on Fixation: M12:75 Nm

Dimensions: Dimensions vary with capacity, ranging from 12.7 mm for 200 Kg to 25.4 mm for 2000 Kg.

Ordering Information: Part numbers are provided for each capacity, with the 2000 Kg model excluded from OILM.

Wiring Connections: The load cell uses a shielded, 4-conductor cable with a standard length of 3 meters. The shield is not connected to the element.

Catalog excerpts

SHEAR BEAM LOAD CELL TYPE H8Q APPLICATIONS: Shear Beam load cell type H8Q can be used in small capacity weighing systems. Some applications are: - Hopper scale - Floor scale and other electronic scale MAIN FEATURES: - Nickel plateted Alloy Steel construction Low profile High accuracy OIML Certificates n.: TC8382 Revision 0 C of C Number: R60/2000-NL1-13.21 Revision 1 IP67 NOMINAL LOAD: C3: 200-500-1000-2000 Kg SPECIFICATIONS: Accuracy Class Output Sensitivity (=FS) Max. Capacity Max. Number of Load Cell Intervals Ratio of min. LC Verification Interval Combined Error Min. Dead Load Safe Overload Ultimate Overload Zero Balance Excitation, recommended Voltage Excitation Max. Terminal Resistance, Input Terminal Resistance, Output Insulation Impedance Temp. Range, Compensated Temp. Range, Operatine Storage Temp. Element Material Recommended Torque on Fixation Ingress Protection 15000 %FS Of Emax Of Emax Of Emax Of FS V V Ω Ω MΩ ° C ° C ° C Nm CELMI s.r.l. Largo Brugnatelli 13/16 20090 BUCCINASCO (MI) ITALY Tel: +39-0245712209 / 0257503712 Fax: +39-0245705836 / 0257506211 Internet: www.celmi.com mail: [email protected]

Open the catalog to page 1