*mydirectindustry

L6N

L6N

Product catalog summary

Applications: The L6N off-center load cell is suitable for small capacity weighing systems, including small weighing platforms and hopper weighing.

Main Features: This load cell is universally applicable, cost-effective, and constructed from aluminum. It holds an OIML test certificate (D09-06.11 Revision 1) and supports a maximum platform size of 350x400 mm.

Nominal Load: The load cell supports nominal loads ranging from 3 kg to 100 kg.

Specifications:

Metrological Characteristics: The nominal load range is 3 to 100 kg, with an initial load of 20% of the nominal load and a maximum load of 150% of the nominal load. Non-linearity is 0.017% of the nominal load, combined error is ±0.0175%, repeatability error is 0.01%, and creep over 30 minutes is ±2%.
Temperature Characteristics: The nominal temperature range is -10°C to +40°C. Zero temperature drift over 10°C is ±0.020% of the nominal output, and output temperature drift is ±0.017%.
Electrical Data: The nominal output is 2 mV/V with a tolerance of ±5%. The nominal supply voltage ranges from 0.5 to 12 V, with a maximum supply voltage of 18 V. Input resistance is 409 ±6% ohms, output resistance is 350 ±3% ohms, and insulation resistance at 20 V is greater than 5000 MΩ. Zero output tolerance is ±2%.
Mechanical Data: The breaking load is 300% of the nominal load, maximum side load is 100%, and deflection is less than 1 mm.
Environmental Conditions: The working temperature range is -20°C to +65°C, and the storage temperature range is -35°C to +70°C. The housing protection is rated at IP-65.

Wiring: The load cell uses a shielded 6-conductor cable with a PVC jacket. The cable length is 3.0 ± 0.1 m, and the diameter is 6.0 ± 0.2 mm. The shield is connected to the element.

Note: Specifications are subject to change without notice.

Catalog excerpts

OFF CENTER LOAD CELL TYPE L6N APPLICATIONS: Off centre load cell type L6N can be used in small capacity weighing systems. Some applications are: - Small weighing platforms - Hopper weighing, etc. MAIN FEATURES: - Universal use Low cost Aluminium construction OIML test certificate n.: D09-06.11 Revision 1 Max Platform size 350X400 SUBJECT TO CHANGE WITHOUT NOTICE CELMI s.r.l. Largo Brugnatelli 13/16 20090 BUCCINASCO (MI) ITALY Tel: +39-0245712209 / 0257503712 Fax: +39-0245705836 / 0257506211 Internet: www.celmi.com mail: [email protected]

Open the catalog to page 1

Outline Dimensions in mm(inches) Adopt a shielded 6 conductor cable and cable jacket is PVC The shield is connected to the element ELECTRICAL CONNECTION: SUBJECT TO CHANGE WITHOUT NOTICE

Open the catalog to page 2

L6N

L6N

Catalog excerpts

All Celmi catalogs and technical brochures

Archived catalogs