*mydirectindustry

L6B

L6B

Product catalog summary

Overview: The document provides technical specifications for the L6B off-center load cell by CELMI s.r.l., designed for small capacity weighing systems such as small weighing platforms and hopper weighing.

Main Features:

IP65 rated for dust and water protection.
Constructed from Aluminium-Alloy.
Suitable for counting scales, balances, and pricing scales.
Maximum platform size: 200x200 mm.

Nominal Load Capacities: Available in 0.3, 0.4, 0.5, 0.6, 1, and 3 kg.

Technical Specifications:

Accuracy Classes: L and H.
Output Sensitivity: 0.9 mV/V ± 0.1.
Linearity, Hysteresis, and Repeatability: ≤±0.015%FS for L, ≤±0.012%FS for H.
Temperature Effects: ≤±0.030%FS/10°C on Zero and Sensitivity for L, ≤±0.020%FS/10°C for H.
Creep/DR (2 minutes): ≤±0.010%FS for L, ≤±0.005%FS for H.
Eccentric Load Cell: ≤±0.020%.
Safe Overload: 120% of Emax.
Ultimate Overload: 150% of Emax.
Zero Balance: 350±3 Ω.
Recommended Excitation Voltage: 5 – 12 V, Max: 18 V.
Terminal Resistance: Input 406 ± 6 Ω, Output 350 ± 3 Ω.
Insulation Impedance: ≥5000 MΩ (@50VDC).
Compensated Temperature Range: -10°C to +40°C.
Operating Temperature Range: -20°C to +50°C.
Recommended Torque on Fixation Bolts: 1.3 Nm.

Material and Protection: The load cell is made from Aluminium and has an ingress protection rating of IP65 according to EN 60529 standards.

Note: Specifications are subject to change without notice.

Catalog excerpts

OFF CENTER LOAD CELL TYPE L6B APPLICATIONS: Off center load cell type L6B can be used in small capacity weighing systems. Some applications are: - Small weighing platforms - Hopper weighing, etc. MAIN FEATURES: - IP65 Aluminium-Alloy Suitable for counting scales, balances, pricing scales Max Platform size 200x200 mm Accuracy class Output sensitivity (= FS) Max. capacity (Emax) Linearity Hysteresis Repeatability Temp. effect on Zero Temp. effect on Sensitivity Creep/DR (2 minutes) Eccentric load cell Safe overload Ultimate overload Zero balance Excitation recommended voltage Excitation max. Terminal resistance input Terminal resistance output Insulation impedance Temp. range compensated Temp. range operating Element material Ingress protection (according to EN 60529) Recommended Torque on fixation bolts CELMI s.r.l. Largo Brugnatelli 13/16 20090 BUCCINASCO (MI) ITALY Tel: +39-0245712209 / 0257503712 Fax: +39-0245705836 / 0257506211 Internet: www.celmi.com mail: [email protected]

Open the catalog to page 1