• Accuracy: ±1% Full Scale Output (F.S.O.)
• Stability: +/- 0.5% F.S.O. per year
• Thermal Effects Zero: +/- 0.075% F.S.O./°C (0.5” Range) +/- 0.120% F.S.O./°C
• Over Pressure: 20 Psi or 2X Full Scale Pressure (FSP), whichever is greater
• Pressure Range: 0.25 WC to 40 WC, with custom or bi-directional ranges available
• Compensated Range: 10° to 50°C (50° to 122°F)
• Media Compatibility: Limited to media that do not attack polyphenylene sulphide (PPS), polyetherimide (PEI), silicone RTV
• Operating Humidity: 90% RH, non-condensing
• Operating Temperature: -25° to 70°C (-13° to 158°F)
• Input Supply: 12-24 VDC/24 VAC
• Supply Current: <10mA (voltage output), <30mA (current output)
• Load Resistance: 2 Kohm minimum on voltage output, 250 ohm maximum loop resistance on 4-20mA (500 ohm maximum upon request)
• Output Signal: 1-5VDC, 1-10VDC, or 4-20mA
• Adjustments: Offset 60% of F.S.O. minimum
• Electrical Connections: Pluggable screw terminal block
• Pressure Connections: Brass barbed fitting for 1/8” I.D. tubing
• Housing: Impact-resistant ABS plastic
• Dimensions: Approx. 3.5” x 2.7” x 1.4” (8.7cm x 6.8cm x 3.5cm)

A typical order number includes the model number, type, output signal, pressure range, and calibration pressure. Example: 860D-01 Cal Pressure = 6”WC, indicating an output of 1-5 VDC calibrated to 6”WC.

• Model Type: Differential or Gage
• Output Signal Options: 0-1 to 5 Volts, 1-6 Volts, 1-10 Volts, 4-20mA (250Ω load), 4-20mA (500Ω load), Custom output
• Pressure Range Options: 0-0.25 to <5”WC, 1-5” to <13”WC, 0.5P to <1P, 1P to <5P, 5P to <15P, 15P to <30P, 30P to 50P

• NEMA 4 enclosure
• DIN Rail mounting kit

Products are warranted for two years against defects in material or workmanship. Defective products will be repaired or replaced when returned freight prepaid.

Specifications are subject to change without notice. The suitability of the product for the customer's application is not warranted.