/- [WjMJ V_ DIFFERENTIAL PRESSURE TRANSMITTER SERIES 750 CONSTRUCTIVE CHARACTERISTICS: - Accuracy: +/- 0,75% F.S.O ( ± 0,25% F.S.O. version available) ( ± 0,5% F.S.O. at les than 1" WC) - Stability: +/- 0,5% F.S.O./yr. - Thermal effects:+/- 0,01% F.S.O./yr - Over pressure: 14,5Psi - Pressure range: 0,1 WC to 40 PSI (custom or Bi-Directional ranges available) - Compensated range: 5° to 60°C (41° to 140° F) - Media: Any dry air or inert non conductive gas - Operating Humidity: 90% RH, non-condensing - Operating Temp.: 0° to 65° C (32° to 149° F) - Input supply: 24VDC/24 VAC - Supply power: 1 watt nominal, 1,5 watt peak - Load resistance: 2 Kohm minimum on voltage out, 250 ohm maximum loop resistance on 4-20mA (500 ohm maximum loop resistance on 4-20mA upon request) - Output signal: 1-5VDC, 1-20VDC or 1-10VDC 4-20mA - Electrical connections: 22AWG 3-conductor cable - Pressure connections: Brass Barbed fitting for 1/8" I.D. id tubing - Housing: Impact resistance ABS plastic - Dimensions: Approx. 3" x 1,50" x 4,30" (7,62cm x 3,81cm x 10,92cm) CELMI s.r.l. Largo Brugnatelli 13/16 20090 BUCCINASCO (MI) ITALY Tel: +39-0245712209 / 0257503712 Fax: +39-0245705836 / 0257506211 Internet: www.celmi.com mail: [email protected]

Prftuzcr* .165" Dm3 HOW TO ORDER: A typical order nurober consiste ofthc model number. type, version, input supply. and output signal. MODEL TYPE PRESSURE RANGE INPUTSUPPLY OUTPUT SIGNAL 750 D = Differential or Gage * User desired range from 0/0,1° WC lo0/5" WC (Bi-direclional ranges available) 24V = 24VDC/ 24VAC 4= 1-5VDC 5= 1-6VDC 9= 1-10 VDC 20 = 4-20mA (custom outpuls available) EXAMPLE: 750D 5" WC 2aV 20 (model number 750, differential or gage type unit, pressure range of 0-5* WC, inpul supply of 24 VDC/24VAC. output signal of 4-20mA) * With a gage application, one of the two pressure ports...