CT-3000
3Pages

CT-3000 Highly compact, high-speed, electrically driven radial turbo compressor with air bearings for the air supply of fuel cell systems. ▪ ▪ ▪ ▪ ▪ High-speed gas bearings for oil-free operation Lowest ratio of volume and weight versus pressure and mass flow due to highest speeds Aerodynamic and electromagnetic optimization for highest total efficiency Integrated temperature measurement for overload protection Compatible to converter CC-3000/CC-3001 Specifications turbo compressor Maximum pressure ratio Maximum mass flow Maximum isentropic overall efficiency1 Maximum speed Maximum converter input power Weight Dimensions (L x W x H) 2.6 155 g/s 65% 130,000 rpm 19 kW 18.5 kg (excl. cable) 370 x 192 x 215 mm (14.6 x 7.6 x 8.5 inch) Cooling Coolant 50%/50% water glycol mixture Coolant temperature In-/Outlet connector type Tube ID Electrical interface Connection type Motor connector Sensor connector Motor and sensor connector Amphenol/PowerLok 4.0 Amphenol/Eco-Mate RM Isentropic overall efficiency including aerodynamic, motor and bearing efficiency All rights reserved. All information in this document is based on Celeroton’s best knowledge and is not to be considered as a warranty or quality specification. The information given is designed as a guidance and customers are requested to check the suitability and usability of the product in their specific application with consulting Celeroton. The information herein is subject to change without notification. www.celeroton.com

Compressor map: operation with converter CC-3001 Pressure ratio versus mass flow Converter input power versus mass flow Inlet volume flow (l/min) Inlet volume flow (l/min) 2.8 16 Converter input power (kW) Pressure ratio (-) Order codes: CT-3000 Ordering information Article number All rights reserved. All information in this document is based on Celeroton’s best knowledge and is not to be considered as a warranty or quality specification. The information given is designed as a guidance and customers are requested to check the suitability and usability of the product in their specific...

The specifications and compressor maps in this document refer to air (ISO 8778) at the inlet of the compressor: temperature: ݑ = 20ǂаݐ, absolute pressure: ְݑ ݰݑְݑ = 1 ۰ݑϰݑΰݑ. Depending on custom specific operation conditions such as e.g. gas inlet pressure and temperature, humidity, cooling conditions, the operation in environmental conditions with vibrations and/or depending on the combination of the compressor and the corresponding Celeroton converter, the compressor maps shown in this document may be different or may have additional limitations. For technical details and further...