Catalog excerpts
CC-AMB Converter for driving ultra-high-speed permanent-magnet synchronous motors (PMSM) with active magnetic bearing. ▪ ▪ ▪ ▪ ▪ ▪ ▪ Integrated drive control and control of three axis active magnetic bearing system PAM and PWM control Sensorless speed control from 0 rpm up to 500,000 rpm Integrated break chopper Controlled motor stop in case of power failure User-friendly PC control software (CelerotonPilot) Ideal in combination with Celeroton AMB-motors Specifications converter Input voltage Uin (DC) Maximum output power Output voltage (peak value phase-phase) Maximum output power motor converter Maximum radial reactive power (active magnetic bearing) Maximum axial reactive power (active magnetic bearing) Maximum phase current radial bearing Maximum phase current axial bearing Maximum frequency/speed (PAM-operation) Operating range motor Communication interface Weight Dimensions (L x W x H) Operating temperature User interfaces (X10, X11) Connector X10 – Digital interface (2 x 6 pins) 1 x digital GND 3 x digital inputs 3 x COM 3 x digital outputs Digital GND for digital inputs 0 – 24 V, galvanically isolated (software adjustable thresholds 0.8 – 20 V) Common rail for digital outputs 0 – 24 V (relay, normally open contacts) 1 x auxiliary power supply Reference for auxiliary power supply All rights reserved. All information in this document is based on Celeroton’s best knowledge and is not to be considered as a warranty or quality specification. The information given is designed as a guidance and customers are requested to check the suitability and usability of the product in their specific application with consulting Celeroton. The information herein is subject to change without notification.
Open the catalog to page 1Connector X11 – Analog interface (2 x 6 pins) 1 x analogue GND 3 x analogue inputs 3 x analogue outputs 2 x temperature measurement input 1 x auxiliary power supply Order codes: CC-AMB-xxx Ordering information Article number Contact Celeroton Contact Celeroton Contact Celeroton Celeroton AG | Industriestrasse 22 | 8604 Volketswil | Switzerland T: +41 44 250 52 20 | F: +41 44 250 52 29 | info@celeroton.com All rights reserved. All information in this document is based on Celeroton’s best knowledge and is not to be considered as a warranty or quality specification. The information given is...
Open the catalog to page 2All Celeroton AG catalogs and technical brochures
-
CC-75-500
5 Pages
-
CT-2000
3 Pages
-
CM-95-250
3 Pages
-
CM-2-500
4 Pages
-
CM-AMB-400
2 Pages
-
CM-25-280
3 Pages
-
CT-14-1000
4 Pages
-
CT-17-1000.GB
3 Pages
-
CT-17-700.GB
3 Pages
-
CT-17-1000
3 Pages
-
CT-17-700
3 Pages
-
CT-15-150
3 Pages
-
CC-230-3500
3 Pages
-
CC-120-1000
3 Pages
-
CC-100-1000
4 Pages
-
CC-400-12000
3 Pages
-
CC-550-7500
4 Pages
-
CC-2000
2 Pages
-
CT-3000
3 Pages
-
CT-3001
3 Pages
-
CC-3000
2 Pages
-
CC-3001
2 Pages