CC-230-3500
3Pages

CC-230-3500 Converter for driving permanent-magnet synchronous motors (PMSM) and brushless DC motors (BLDC). ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Sensorless speed control from 7,000 rpm up to 500,000 rpm Maximum output power of 3.5 kW No output filter required User definable setup for different motor parameters Torque- or speed-control Internal or external braking chopper Input with power factor correction (PFC) Input voltage 110 – 230 VAC (50 Hz/60 Hz) User-friendly PC control software (CelerotonPilot) Compressor surge protection functionality Specifications converter Input voltage (AC) Maximum output power Output voltage (Peak value phase-phase) Maximum phase current (PAM-operation) Maximum frequency/speed (PAM-operation) Operating range Communication interface Brake chopper (pulse/continuous) External brake chopper PC control software Weight Dimensions Operating temperature 0 – 24 V (relay, normally open contacts) Connector X5 – Digital Input 4 x digital inputs 1 x power supply 0 – 24 V (software adjustable thresholds 0.8 – 24 V) 24 V, 100 mA For input voltages higher 200 VAC; 1.8 kW for input power of 100/110 VAC Fundamental of the PAM block current All rights reserved. All information in this document is based on Celeroton’s best knowledge and is not to be considered as a warranty or quality specification. The information given is designed as a guidance and customers are requested to check the suitability and usability of the product in their specific application with consulting Celeroton. The information herein is subject to change without notification.

Connector X6 – Digital Output 2 4 x rotor position signals (SA, SB, SC, SI) Connector X7 – Analog Output 4 x analog outputs Connector X8 – Analog Input 4 x analog inputs 1 x power supply Connector X9 – Hall Motor 1 x power supply 3 x digital hall sensor inputs 5 V, 100 mA (open collector), pull up to 5 V Connector X10 – Encoder Motor 1 x power supply 3 x differential encoder inputs Connector X11 –Motor Interface 1 x temperature measurement input 1 x temperature measurement input Connector X12 – Safety 1 x power supply 2 x Safety switching input and interlock Order codes: CC-230-3500...

Celeroton AG | Industriestrasse 22 | 8604 Volketswil | Switzerland T: +41 44 250 52 20 | F: +41 44 250 52 29 | info@celeroton.com All rights reserved. All information in this document is based on Celeroton’s best knowledge and is not to be considered as a warranty or quality specification. The information given is designed as a guidance and customers are requested to check the suitability and usability of the product in their specific application with consulting Celeroton. The information herein is subject to change without notification.