MAGMO MASSECUITE PUMPS

MAGMO MASSECUITE PUMPS The Magmo pump is a positive displacement pump which uses the ‚elipse and scraper’ pumping principle. The basic design was originally conceived by the Sugar Industry itself, and Plenty Mirrlees Pumps have been manufacturing this type of pump for over 30 years. Magmo pumps are designed principally to handle high viscosity abrasive sugar products that contain sugar crystals, such as Massecuite, Magma and Molasses. The design ensures that the Sugar crystals contained within the liquids are not damaged by the pumping action, and that the pump is subjected to minimum wear. Magmo...

The grease in the bearing will slowly become contaminated over time by the pumped medium. This contaminated grease must be replaced by fresh grease to avoid premature bearing wear. Re-greasing the bearing is a flushing operation. Fresh grease is introduced through a grease nipple at the outer end of the bearing, displacing the old contaminated grease along the grooves and through a drain valve at the inner end. The drain valve is simply interlocked to the grease nipple to ensure that both are open during greasing. This Magmo pump for the purpose of recirculating Massecuite to a Vertical Crystallizer....

Approximate dimensions (mm.) DO NOT use for installation purposes PUMP FEATURE Gentle pumping action Large suction port Good tolerance to large particles Grease packed bearings with flushing arrangement Replaceable sealing strip and sealing arm wear strip Heavy duty sealing arm spring Shear pin coupling Belt Drive Unit USER BENEFIT • Minimum sugar crystal damage. • Eliminates cavitation problems, and allows higher running speeds. • Prevents pump siezure • Extended bearing and pump life. • Zero leakage of pumped liquid. • Low cost wearing parts that are easily replaced to extend the overall pump...

OPERATING PARAMETERS Magmo pumps are designed to operate primarily on Massecuite, Magma and Molasses. Flow range Discharge Pressure Standard construction Casing Cast Iron Cast Iron Ductile Iron (with Hardened edge) Ductile Iron Bearing Bushes Mechanical Seal Options Shaft Stainless Steel Rotor Bronze Sealing Mechanical Seal Drive options Direct Drive from geared motor through a shear-pin coupling. Direct Drive from belt driven gear All Magmo pumps are supplied with steaming out connections as standard Magmo No. 6 belt driven unit

MAGMO MASSECUITE PUMPS O PLENTY* SPEED EXCELLENCE I PARTNERSHIP Celeros Flow Technology Earl Haig Road, Hillington Business Park, Glasgow, G52 4JN, UK P: +44 141 883 0314 E: [email protected] MIDDLE EAST Celeros Flow Technology reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction, and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability...