SCR Power Controllers
36Pages

The partnership to bring solutions above the limits ! SCR Power Controllers Innovative and Reliable range of THYRISTOR POWER REGULATORS (TPR) • Ultra compact footprint • Up to 690Vac • Current range : 8-400Amps @ 50°C • Analog or digital control • Fieldbus Interface(EtherCAT, Modbus TCP, Modbus RTU, PROFINET, Ethernet/IP) • Easy USB setup • DIN Rail / Panel mount / External mount / Liquid cooled • Touchsafe with global certifications Single Phase SCR Power controllers Three Phase SCR Power controllers Digital Interfaces

Dear customers, dear readers, January 2017, celduc® relais is now considered as a worldwide specialist in the design and manufacturing of Solid State Relays (SSR). In order to expand our high-end SSR range with power control solutions up to 400A, we are today very proud to announce an exclusive distribution agreement with USA based company Control Concept, Inc. The agreement addresses Europe, Africa, Pacific, Middle and Far East except India, Iran and North Korea. Control Concept, Inc., founded in 1980 and located in Chanhassen, MN, is a privately-held company and the market leader in the...

SCR Power Controllers range Typical applications : • Semiconductor Processing Equipment • Crystal & Solar Manufacturing • Electric furnaces • Resistance heating • Glass industry processing equipment 1-800-765-2799

CONTROL CONCEPTS microFUSIONSINGLE PHASE SCR POWER CONTROLLERS FEATURES Control Features Microprocessor-based controller, phase lock loop timing Firing modes: Zero Cross, Phase Angle, and Zero Cross Transformer (ZCT) Mode Feedback: voltage, current, true power, external Adjustable soft start for phase angle control Output limits: voltage, current, power Missing cycle detection Use SYNC-GUARD™ to power level multiple Zero-Cross controllers Prevent upstream transformer heating with TRANS-GUARD™ Dedicated input bit for Run/Stop kWh meter, Resistance Measurement Partial Load Failure...

DESCRIPTION, CONTINUED Status LEDs and a LED bar graph make operation and troubleshooting simple. A plug-n-play USB interface and free Control Panel software for your PC further simplifies installing and configuring the controller to your application. For example, controller settings can be duplicated by simply loading a configuration file saved from a previous unit. Setpoints can be controlled through the standard analog or optional digital fieldbus interface. The factory-configured analog setpoint signal ranges are 0 - 5 Vdc and 4 - 20 mA, both of which are field scalable from 0 - 10 Vdc...

P1/P2 CONNECTOR P1 Connector + 5 Vdc Output (onboard supply up to 10 mA) + Analog Input SP 1 * PWM + * Analog Input SP 2 Common Run/Stop Input *General Purpose Input 24 Vdc Input * Retransmit 1 Output * Retransmit 2 Output SINGLE PHASE LINE/LOAD CONNECTIONS SINGLE PHASE 8 - 80 AMP PE GND See manual for recommended wire sizes. *Note: 0.60 mA maximum through B1 connection at 600 Vac MicroFusion single phase

SINGLE PHASE LINE/LOAD CONNECTIONS, CONTINUED SINGLE PHASE 100 - 160 AMP *Note: 0.60 mA maximum through B1 connection at 600 Vac, 22 AWG minimum wire gauge with #6 or M3.5 ring terminal connection See manual for recommended wire sizes. *Note: 0.60 mA maximum through B1 connection at 600 Vac MicroFusion single phase

CONTROL CONCEPTS FEATURE COMPARISON MicroFUSION is available with one of four performance options: SX-S (Standard board), SX-L (Standard board with Current features), HX-L (High Performance board with Current and Voltage features) and HX-P (Fully populated High Performance board) • = Included O = Field Upgradable Option □ = Option Available at Manufacturing Time - = Not available FEATURE COMPARISON LIST, continues on next page

CONTROL CONCEPTS FEATURE COMPARISON, CONTINUED FEATURE LIST, CONTINUED NOTE: Refer to the Operators Manual for EMC and other pertinent information. MicroFusion single

CONTROL CONCEPTS SPECIFICATIONS, CONTINUED Mean Time Between Failure (MTBF) 100,000 Hours at 25°C | Surrounding Air Temperature effect on the Controller MicroFusion single phase

CONTROL CONCEPTS SPECIFICATIONS, CONTINUED COOLING MicroFusion single phase

CONTROL CONCEPTS celduc* relais MODEL NUMBERS Board Type SX = Standard HX = High performance Terminal L = Lug (100 - 400 A) T = Pluggable terminal block (8 - 80 A) R = Ring terminal 1 (8 - 80 A) Frame Style A = 16 - 32 A (Panel Mount / DIN Rail) B = 50 - 80 A (Panel Mount / DIN Rail) E = 8 A (Panel Mount / DIN Rail) G = 100 - 160 A (Panel Mount) H = 200 - 240 A (Panel Mount) I = 320 - 400 A (Panel Mount) Option Board - 0 = None I = EtherNet/IP Amp Size - Available with SX: S = Standard L = Adjustable Current Limit and Current Feedback Available with HX: L = Adjustable Current Limit, Current...

CONTROL CONCEPTS microFUSION THREE PHASE SCR POWER CONTROLLERS FEATURES Auto-Ranging Input Voltage UL: 24 - 600 Vac, 45 - 65 Hz, CE: 24 - 690 Vac, 45 - 65 Hz OPTIONS Analog Interface (Up to Two Analog Inputs) Standard setpoint ranges: 0 - 5 Vdc, 4 - 20 mA Remote Display Field scalable 0 - 10 Vdc , 0 - 20 mA , or potentiometer 2 line 16 character text display with 5 buttons Microprocessor-based controller, phase lock loop timing Firing modes: Zero Cross, Phase Angle, and Zero Cross Transformer (ZCT) Mode Feedback: voltage, current, true power, external Adjustable soft start for...

DESCRIPTION, CONTINUED Status LEDs and a LED bar graph make operation and troubleshooting simple. A plug-n-play USB interface and free Control Panel software for your PC further simplifies installing and configuring the controller to your application. For example, controller settings can be duplicated by simply loading a configuration file saved from a previous unit. Setpoints can be controlled through the standard analog or optional digital fieldbus interface. The factory-configured analog setpoint signal ranges are 0 - 5 Vdc and 4 - 20 mA, both of which are field scalable from 0 - 10 Vdc...