*mydirectindustry

SCB564310

Product catalog summary

Specifications:
The document describes a double solid-state relay with a control voltage range of 5-30 VDC and an output of 400VAC. It supports two separate control commands and has a synchronous AC output of 24-510VAC at 40A per channel. Power connections are made via FASTONS, and control connections are made via connectors.

Control Characteristics (at 20°C):
- Control Voltage (Uc): 5-30 V
- Control Current (Ic): 3-1000 mA
- Release Voltage (Uc off): 1 V
- Input Internal Resistor (Rc): Specified in fig.1
- Reverse Voltage (Urv): 30 V

Input-Output Characteristics (at 20°C):
- Input-output isolation: 4000 VRms
- Output-case isolation: 2500 VRms
- Leg 1-Leg 2 isolation: 2500 VRms

General Characteristics:
- Weight: 110 g
- Storage Temperature Range: -40 to +100°C
- Operating Temperature Range: -40 to +100°C
- Junction-Case Thermal Resistance: 1.1 °C/W

Output Characteristics (at 20°C):
- Load Voltage (Ul): 400 V rms
- Operating Range: 24-510 V rms
- Peak Voltage (Up): 1200 V
- Synchronizing Level (Usync): +/-12 V
- Latching Voltage (Ua): 10 V
- AC1 Nominal Current (Il AC1): 40 A
- Non-Repetitive Overload Current (Itsm): 350 A
- On State Voltage Drop (Vd): 1.6 V
- Off State Leakage Current (Ilk): 2.5 mA
- Minimum Load Current (Ilmin): 5 mA
- Turn On Time (ton max): 10 ms
- Turn Off Time (toff max): 10 ms
- Operating Frequency Range: 10-440 Hz
- Off State dv/dt: 500 V/µs
- Maximum di/dt Non-Repetitive: 50 A/µs
- I2t (<10ms): 612 A2s
- External Protection Possibility: Fuse

Additional Notes:
- Connections are limited to 20A.
- Repetitive inrush current can decrease the relay's lifetime.
- All technical characteristics are subject to change without prior notice.

Catalog excerpts

Relais Statique Double Double Solid State Relay • Sortie AC synchrone : 24-510Vac - 2 x 40A . • 2 commandes séparées . • Connection de Puissance par FASTONS • Connection - 40A x 2 Zero-Cross AC Output. • 24-510VAC de commande par picots ( connecteur ) • 1 control by leg • Power connections by FASTONS • Control connections by connector Inputs : 4 pins 0,64mm sq. - manufacturers : Berg ,Mollex ,AMP , Proner comatel ... Other input terminals on request fig. 1 :Caractéristique d'entrée / Control characteristic Caractéristiques de commande (à 20°C) / Control characteristics (at 20°C) Résistance interne / Input internal resistor Tension inverse / Reverse voltage Caractéristiques d'entrée-sortie (à 20°C) / Input-output characteristics (at 20°C) Uimp/Ui Isolement sortie-semelle/Output-case isolation @500m Uimp/Ui fig1 : C arac téris tique d'entrée / C ontrol c harac teris tic Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc nom ) Tension de relachement/Release voltage Isolement entrée-sortie/Input-output isolation @500m Isolement entre voies / Leg 1-Leg 2 isolation @500m Caractéristiques générales / General characteristics Parameter Plage de température de stockage / Storage temp°range Plage de température de fonctionnement/Operating temp°range Resistance thermique Jonction-Case/Junct.-Case thermal resistance(1 leg) Proud to serve you All technical caracteristics are subject to change without previous notice. Caractéristiques sujettes à modificatio

Open the catalog to page 1

page 2 / 2 F/GB Caractéristiques de sortie(à 20°C) / Output characteristics (at 20°C) Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crête (écrêteur de tension) / Peak voltage (clamping voltage) Niveau de synchonisation / Synchronizing level Tension d'amorçage / Latching voltage Courant nominal AC1/ AC1 nominal current Courant de surcharge non répétitif /Non repetitive overload current Chute tension directe crête/ On state voltage drop Courant de fuite état bloqué/ Off state leakage current Courant de charge minimum / Minimum load current...

Open the catalog to page 2

SCB564310

SCB564310

Catalog excerpts

All Celduc relais catalogs and technical brochures

Archived catalogs