CEL Components S.r.l. Via Ca’ dell’Orbo Sud 4 - 40055 Castenaso (Bologna) Italy Tel. +39 051 782505 Fax +39 051 782477 www.cel.eu [email protected] P.IVA 04102600378 CCIAA BO 0339628 ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS Compocel® VP Panel’s composition SKIN OF POLYESTER GRP with white gel coat and protective film on gelcoat side Thickness: from 1,1 mm to 3 mm suitable for contact with food products CORE Polypropylene honeycomb Standard dimensions (other dimensions available on request) Characteristics of the polypropylene honeycomb Honeycomb core’s properties Type Cell size mm Colour Density kg/m Effective temperature range °C Maximum width mm Minimum width mm Maximum length mm Density referred to the block dimension * T30: - thermowelded foil 30gr/m3 for adhesion. ** T30F75: thermo-welded tissue for wet lay-up. on request - Other dimensions, core heights and types upon request. - Minimum order quality for each type: 10 pallets. LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale. • Thickness’ tolerance ± 0,3 mm • Dimension’s tolerance ± 30 mm Sandwich Panel Compocel VP On request: • RAL colours Xtra