Catalogs >
Cel Components S.r.l. >
Ballistic Panels

Ballistic Panels
8Pages

Catalog excerpts

BALLISTIC & DEFENCE

BALLISTIC & DEFENCE Honeycomb panels have an extraordinary potential for ballistic purposes as they can absorb strong shockwaves, contain material and are lightweight and transportable. Multiple materials can be used depending by the needs of the costumer: - polypropylene is a rigid material that provides thermal insulation and has a good behaviour to water and humidity; - Various textiles can boost the properties of panels, para Aramidic textile, for example, prevents perforation of the panel; - a dense aluminium structure absorbs the impact, thanks to a plastic deformation of the...

Open the catalog to page 2

Project: Year: Location: Product: Shelter for electronic equipment 2019- ongoing Israel Compocel ALP These panels are being produced as part of a system to be used in Israel as a military mobile shelter for electronic equipment. Polypropylene was chosen for its lightness and its characteristic as thermal insulator. Pared with aluminium sheets the product is able to carry at least the 500 Kg of equipment. - Aluminium skin - Polypropylene honeycomb - Aluminium skin Progetto Anno Luogo Prodotto H: classified H: classified H: classified Armoured car underside 2018 Egypt Compocel AL High density...

Open the catalog to page 3

SANDWICH PANEL COMPOCEL AL Technical data sheet for standard panels (dimensions, materials and special finishes on request) panel size mm skin alluminium alloy 1000 series, 3000 series, 5000 series honeycomb alluminium alloy thickness of honeycomb foil μm honeycomb density Kg/m³ two-components polyurethane adhesive/thermoplastic film/ epoxy film/ two-components epoxy adhesive skin characteristics rough/primer/polyester/PVDF/ anodised type panel (some examples) - Panel Thickness mm type panel (some examples) - Skin Thickness mm compressive stabilised strength MPa ** ‡ ASTM C 365-365 M Mpa...

Open the catalog to page 4

Roma Termini: exterior view Rendering of Rome Termini from above System stratigraphy

Open the catalog to page 5

Fabric construction (ends/picks per cm) Areal weight Fabric thickness Tensile strength (warp/welf) Safety information Keep the material in the original packaging in clean and dry place Mechanical fiber properties of klevar® 29 3300 dtex Breacking tenacity: 2910 mpa (nominal) Modulus: 72,5 gpa (nominal) This information is indicative of our present standard production: it might be changed and does’t confirm contractual liabilities Twaron® 29 3360 dtex - Type 1000 Fabric construction (ends/picks per cm) Areal weight Fabric thickness Tensile strength (warp/ welf) Safety information Keep the...

Open the catalog to page 6

OTHER POSSIBLE APPLICATIONS Below are two examples of a light weight safe module, easy and fast to assemble. The system was designed to be permanently installed in existing buildings in the event of an explosion to absorb shock waves and collapses caused by a nearby explosion.

Open the catalog to page 7

CEL Components S.r.l. Via Ca’ dell’Orbo Sud, 4 · 40055 Castenaso (Bo) Italy Tel. +39 051 782505 · Fax +39 051 782477 info@cel.eu LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale. UNI EN ISO 9001:2015 Reg No: 991

Open the catalog to page 8