MICRO-CONTROLLED OXYGEN GENERATORS With external air compressors HCM 2003 (PSA) 6SC-1M-2M-3M-4M-6M-12M-18M-24M For medical and industrial use - Produce oxygen from compressed air - Controlled by micro-processor - Automatic operation. - Low operating cost - Easy to install and maintain - Include visual and audible alarms (power failure, high and low pressure, low oxygen concentration, etc.), OXYGEN CONCENTRATION: Nominal 94% ± 1, built-in oxygen analyse Dew point: 100°F (-73°C) CONNECTIONS: Compressed air intake: 1” Oxygen output: 3/8” TYPICAL APPLICATIONS: - Hospital systems, central oxygen supplies. - Ozone - Aquaculture - Waste / Water Treatment - Thermal / chemical oxidation - Cutting / Welding - Work with glass / Production / Blowing TECHNICAL SPECIFICATIONS CHARACTERISTICS Oxygen output flow (1) Configurable oxygen output pressure (2) Oxygen output flow (1) Configurable oxygen output pressure (2) (1) Factory calibrated to your specific requirements (2) Other configurable pressures available. See air consumption table. CEIMSA ELECTROMEDICINA S.L. Polígono Mugazuri, 6 A – 31600 BURLADA (Navarra) – ESPAÑA Tel.: 34 948 131 776 - Fax: 34 948 124 470 e-mail: [email protected] http://www.ceimsa.e

MICRO-CONTROLLED OXYGEN GENERATORS With external air compressors HCM 2003 (PSA) 6SC-1M-2M-3M-4M-6M-12M-18M-24M For medical and industrial use Pressure Swing Adsorption” (PSA) oxygen generation process Air contains 21% oxygen, 78% nitrogen, 0.9% argon and 0.1% other gases. The Ceimsa oxygen generation system allows oxygen to be separated from compressed air by passing it through its valves into columns containing a molecular compound called zeolite, which, under pressure, retains nitrogen molecules and permits oxygen to pass at a nominal concentration of 94% ± 1. The cycle is repeated successively...