SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 60 FAMILY

Product catalog summary

Specifications:
The DS 60 solenoid by C.E.I. srl operates at rated voltages of 12 V DC and 24 V DC, with pull currents of 37 A and 20 A respectively. It is designed for intermittent duty service with a stroke of 50 mm and a starting force of 8.4 Kg. The windings are insulated to class H (180°C), and it functions in ambient temperatures ranging from -40°C to 120°C. The solenoid weighs 1.83 Kg.

Force Variation:
The force variation coefficient is dependent on ambient temperature, affecting the solenoid's performance.

Versions and Options:
Available in pull action (D6) and pull-push action (DS6) versions, with voltage options of 12 V DC and 24 V DC. Electrical connections can be made via standard Faston or cables, with optional springs available.

Brackets and Accessories:
Brackets A and B are available, with detailed dimensions provided. Accessories include clevis, axial articulated joint, threaded dowel, and 90° articulated joint, all with M8 threading.

Operation:
The single coil solenoids are designed for intermittent duty, providing high force-stroke pick-up. They are used to stop diesel engines by actuating the fuel supply lever. The solenoid is energized only during the stop phase to cut off fuel flow. Energized time should not exceed one minute, with sufficient cooling time between cycles.

Electrical Connections:
The solenoid's electrical connection is not polarity-dependent. It is suitable for engines with injection pumps that are normally open, and shutdown is achieved by solenoid energizing.

Application Example:
An example application includes engine shutdown by solenoid energizing, with detailed diagrams illustrating the shutdown lever travel and end-of-stroke positions.

Catalog excerpts

SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 60 FAMILY-1

8.52170 935090 ط 404 Force (Kg) DIAGRAM OF FORCES AND STROKES 2520 15105 Rated voltage 12 V DC 24 V DC Pull current 37 A 20 A Duty service Intermittent Stroke 50 mm Force at starting 8.4 Kg Windings insulation class H (180 C) Ambient temperature -40а C 120 C Weight 1.83 Kg > Kg 8.4 (N82) 01020304050 Stroke (mm) 1 Kg = 9.81 Newtons FORCE VARIATION COEFFICIENT ACCORDINGWITH AMBIENT TEMPERATURE AMBIENT TEMPERATURE The single coil Elettrostart solenoids are for intermittent duty provinding high FORCE-STROKE pick-up. These solenoids are used to stop diesel engines when energized by actuating the fuel supply lever. The solenoid is de- energized when the engine is running, only in the stop phase it is energized cutting off the fuel flow. Due to its high operating power the energized time must not exceed one minute, while the de-energized time between two energizing phases must be long enough for the solenoid to cool down. > 00.40.60.81.0 1.2 255075100125 AVAILABLE OPTIONSThe desired model has to be defined choosing one option in every column, building in this way the solenoid code. > o C Versions Voltages Circuits Brackets Optional Springs Electrical connections D6 pull action 1 = 12 V DC 1 = Series D A M1 Standard Faston DS6 pull-push action 2 = 24 V DC B F = Cables > CORSO PRIMO LEVI, 7 - 10090 CASCINE VICA - RIVOLI - TORINO (ITALY) - TEL. 0039 0119594446 - FAX. 0039 0119591357e-mail: [email protected] www.cei-italy.it C.E.I. srl size="-3">

Open the catalog to page 1