Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. C.E.I.
  3. ELETTROSTART

ELETTROSTART

ELETTROSTART
1 / 21 PagesView full catalog

ELETTROSTART

Product catalog summary
Product Models and Series:
The document describes two models, ES 50 “Special” and ES 60 “Special”, each available in three series for both 12 V and 24 V configurations. The series for the ES 50 model include ES511AM4TG, ES521AM4TG, ES512AM4TG, ES522AM4TG, ES513AM4TG, and ES523AM4TG. For the ES 60 model, the series are ES611AM3TG, ES621AM3TG, ES612AM3TG, ES622AM3TG, ES613AM3TG, and ES623AM3TG.
Technical Specifications:
Both models have a stroke example of 32 mm for pull or push actions. The ES 50 model features a diameter of 50 mm and a length of 82 mm, while the ES 60 model has a diameter of 60 mm and a length of 90 mm. The magnetic force at the start of the stroke is 7 Kg for the ES 50 and 10 Kg for the ES 60. At the end of the stroke, the holding magnetic force is 18 Kg for the ES 50 and 25 Kg for the ES 60. The mechanical force of the spring at the start of the stroke is 4.2 Kg for the ES 50 and 5 Kg for the ES 60, with compression forces of 6 Kg and 12 Kg respectively.
Usage Frequency:
The maximum continuous usage is 3 cycles per minute, while intermittent usage allows for 10 cycles per minute for a maximum duration of 5 minutes.
IE04 Electronic Switch:
The IE04 is a timed static electronic switch suitable for 12 and 24 V, designed to control dual coil ELETTROSTART systems. It de-energizes the PULL coil after 500 milliseconds to prevent overheating. The switch provides mechanical and electrical benefits, such as preventing solenoid damage due to incorrect adjustments and replacing internal solenoid switches that are unsuitable for dusty or saline environments.
Specifications of IE04:
The voltage range is 12-24 V ±10%, with a maximum non-repetitive voltage of 100 V and a maximum current of 95 A. The cables are 2.5 mm² with a length of 300 mm, and the unit weighs 130 g. Cables can be welded to the Elettrostart, eliminating the need for a connector.
See more

Catalog excerpts

ELETTROSTART-1

CON INTERRUTTORE INTERNO WITH INTERNAL SWITCH PER INTERRUTTORE ESTERNO FOR EXTERNAL SWITCH GRUPPO FAMILY STAFFA BRACKET TRAZIONE PULL SPINTA PUSH GRUPPO FAMILY CON INTERRUTTORE INTERNO WITH INTERNAL SWITCH TRAZIONE PULL STAFFA BRACKET STAFFA BRACKET STAFFA BRACKET TRAZIONE PULL SPINTA PUSH PER INTERRUTTORE ESTERNO FOR EXTERNAL SWITCH TRAZIONE PULL SPINTA PUSH GRUPPO FAMILY STAFFA BRACKET STAFFA BRACKET STAFFA BRACKET GRUPPO FAMILY STAFFA BRACKET STAFFA BRACKET STAFFA BRACKET STAFFA BRACKET TRAZIONE PULL SPINTA PUSH INTERMITTENTE (D) INTERMITTENT (D) TRAZIONE PULL SPINTA PUSH MODELLI MODELS “SPECIAL” COSTRUZIONI ELETTROMAGNETICHE INDUSTRIALI C.E.I. srl CORSO PRIMO LEVI, 7 - 10090 CASCINE VICA - RIVOLI - TORINO (ITALY) - Tel. 0039 0119594446 - Fax. 0039 0119591357 e-mail: [email protected] www.cei-italy.it

 Open the catalog to page 1
ELETTROSTART-2

SPECIFICHE ELETTROMAGNETICHE ELECTROMAGNETIC SPECIFICATIONS MODELLO E - CON DOPPIA BOBINA PER SERVIZIO CONTINUATIVO MODEL E - DUAL COIL SOLENOID FOR CONTINUOUS DUTY CODICE GRUPPO FAMILY CODE DIAMETRO DIAMETER CORSA STROKE FORZA ALLA PARTENZA FORCE AT START BOBINA DI POTENZA PULL COIL BOBINA DI TENUTA HOLD COIL PESO WEIGHT MODELLO D - CON UNA SOLA BOBINA PER SERVIZIO INTERMITTENTE MODEL D - SINGLE COIL SOLENOID FOR INTERMITTENT DUTY CODICE GRUPPO FAMILY CODE DIAMETRO DIAMETER FORZA ALLA PARTENZA FORCE AT START DIAGRAMMA DELLE FORZE E CORSE ASSORBIMENTO BOBINA COIL INPUT PESO WEIGHT DIAGRAM OF...

 Open the catalog to page 2
ELETTROSTART-3

FAMILY E - ES 40 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION PUSH ACTION, AND-OF-STROKE 188 Rated voltage Pull current Hold current Duty service Stroke Force at starting Windings insulation class Ambient temperature Weight The solenoid has two windings: An intermittent-service pulling winding involved in the initial phase for approximately 150 ms, with the function of moving the plunger. A continuous-service holding winding, with the function of maintaining the plunger in position. For a proper operation of the solenoid, it is indispensable for the plunger to reach end of travel and...

 Open the catalog to page 3
ELETTROSTART-4

FAMILY E - ES 40 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION ELECTRIC CIRCUITS FOR DIESEL ENGINES PULL COIL DIRECT ELECTRIC CIRCUIT The solenoid connection is not conditioned by the polarity (+ and -) In the version with cables these are blue. HOLD COIL WITH INTERNAL SWITCH BY FASTON FASTON CONNECTIONS ELECTRICAL CONNECTIONS WITH INTERNAL SWITCH ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS BY FASTON SMALL AND LARGE PULL COIL STARTER MOTOR STARTER RELE’ PULL COIL START BLACK COMMON AXIAL ARTICULATED JOINT WIRE DIAMETER SPRING 1 WIRE DIAMETER SPRING 1.2 WIRE DIAMETER SPRING 1.3 SPRING...

 Open the catalog to page 4
ELETTROSTART-5

FAMILY E - ES 50 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION Rated voltage Pull current Hold current Duty service Stroke Force at starting Windings insulation class Ambient temperature Weight The solenoid has two windings: An intermittent-service pulling winding involved in the initial phase for approximately 150 ms, with the function of moving the plunger. A continuous-service holding winding, with the function of maintaining the plunger in position. For a proper operation of the solenoid, it is indispensable for the plunger to reach end of travel and to obtain the perfect adherence...

 Open the catalog to page 5
ELETTROSTART-6

FAMILY E - ES 50 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION ELECTRIC CIRCUITS FOR DIESEL ENGINES PULL COIL DIRECT ELECTRIC CIRCUIT The solenoid connection is not conditioned by the polarity (+ and -) In the version with cables these are blue. HOLD COIL WITH INTERNAL SWITCH BY FASTON FASTON CONNECTIONS ELECTRICAL CONNECTIONS WITH INTERNAL SWITCH ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS BY FASTON SMALL AND LARGE PULL COIL STARTER MOTOR STARTER RELE’ START BLACK COMMON PULL PULL COIL AXIAL ARTICULATED JOINT SPRING SWIVEL ACCESSORIES WITH M6 THREAD The connection of the solenoid...

 Open the catalog to page 6
ELETTROSTART-7

FAMILY E - ES 46 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION SERIES 1-2 INTERNAL SWITCHING EXTERNAL SWITCHING Rated voltage Pull current Hold current Duty service Stroke Force at starting Windings insulation class Ambient temperature Weight Force (Kg) DIAGRAM OF FORCES AND STROKES The solenoid has two windings: 1) An intermittent-service pulling winding involved in the initial phase for approximately 150 ms, with the function of moving the plunger. 2) A continuous-service holding winding, with the function of maintaining the plunger in position. For a proper operation of the solenoid,...

 Open the catalog to page 7
ELETTROSTART-8

FAMILY E - ES 46 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION ELECTRIC CIRCUITS FOR DIESEL ENGINES PULL COIL DIRECT ELECTRIC CIRCUIT The solenoid connection is not conditioned by the polarity (+ and --) In the version with cables these are blue. HOLD COIL WITH INTERNAL SWITCH ELECTRICAL CONNECTIONS WITH INTERNAL SWITCH PULL COIL ELECTRIC CIRCUIT COMBINED WITH STARTER MOTOR The solenoid connection feeding the pull coil P and the hold coil T is marked with the indication PULL (red cable) and HOLD (blue cable). The body is connected to ground. The pull coil P is fed in parallel with the...

 Open the catalog to page 8
ELETTROSTART-9

FAMILY E - ES 60 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION PUSH ACTION, AND-OF-STROKE 93 35 Rated voltage Pull current Hold current Duty service Stroke Force at starting Windings insulation class Ambient temperature Weight DIAGRAM OF FORCES AND STROKES Forza (Kg) DIAGRAMMA FORZA-CORSA The solenoid has two windings: An intermittent-service pulling winding involved in the initial phase for approximately 150 ms, with the function of moving the plunger. A continuous-service holding winding, with the function of maintaining the plunger in position. For a proper operation of the solenoid,...

 Open the catalog to page 9
ELETTROSTART-10

FAMILY E - ES 60 DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION ELECTRIC CIRCUITS FOR DIESEL ENGINES PULL COIL DIRECT ELECTRIC CIRCUIT The solenoid connection is not conditioned by the polarity (+ and -) In the version with cables these are blue. HOLD COIL WITH INTERNAL SWITCH BY FASTON FASTON CONNECTIONS ELECTRICAL CONNECTIONS WITH INTERNAL SWITCH ELECTRICAL CONNECTIONS BY FASTON SMALL AND LARGE PULL COIL HOLD COIL STARTER RELE’ START BLACK COMMON STARTER MOTOR WITHOUT INTERNAL SWITCH ELECTRICAL CONNECTIONS OPTIONAL SPRINGS ACCESSORIES WITH M8 THREAD P8 SPRING SWIVEL The connection of...

 Open the catalog to page 10

All C.E.I. catalogs and technical brochures

  1. 4 WAY SOLENOID SLIDE VALVE
    4 WAY SOLENOID SLIDE VALVE

    4  Pages

  2. EG3 3 WAY SOLENOID VALVE
    EG3 3 WAY SOLENOID VALVE

    2  Pages

  3. N 300
    N 300

    2  Pages

  4. SINGLE COIL ELECTROMAGNETS FOR PUSH-PULL ACTION N 010
    SINGLE COIL ELECTROMAGNETS FOR PUSH-PULL ACTION N 010

    1  Page

  5. SINGLE COIL ELECTROMAGNETS FOR PUSH-PULL ACTION N60
    SINGLE COIL ELECTROMAGNETS FOR PUSH-PULL ACTION N60

    1  Page

  6. SINGLE COIL ELECTROMAGNETS FOR PUSH-PULL ACTION N 27
    SINGLE COIL ELECTROMAGNETS FOR PUSH-PULL ACTION N 27

    1  Page

  7. ELECTROMAGNETIC PROFILABLE BARS WITH REPLACEABLE COIL
    ELECTROMAGNETIC PROFILABLE BARS WITH REPLACEABLE COIL

    1  Page

  8. ELECTROMAGNETS FOR HOLDING AND LIFTING – CYLINDRICAL SIZE
    ELECTROMAGNETS FOR HOLDING AND LIFTING – CYLINDRICAL SIZE

    1  Page

  9. SOLENOID VALVES FOR DIESEL ENGINES
    SOLENOID VALVES FOR DIESEL ENGINES

    7  Pages

  10. CYLINDRICAL AND BAR SIZE ELECTROMAGNETS
    CYLINDRICAL AND BAR SIZE ELECTROMAGNETS

    5  Pages

  11. ELECTROMAGNETS FOR LOOKING
    ELECTROMAGNETS FOR LOOKING

    2  Pages

  12. ELECTROMAGNETS AND ACTUATORS
    ELECTROMAGNETS AND ACTUATORS

    7  Pages

Archived catalogs

  1. SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 40 FAMILY
    SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 40 FAMILY

    2  Pages

  2. SPECIAL MODEL SOLENOID E - ES 60 FAMILY
    SPECIAL MODEL SOLENOID E - ES 60 FAMILY

    1  Page

  3. E- ES 60 FAMILY
    E- ES 60 FAMILY

    2  Pages

  4. TIMED STATIC ELECTRONIC SWITCH
    TIMED STATIC ELECTRONIC SWITCH

    1  Page

  5. SPECIAL MODEL SOLENOID E - ES 50 FAMILY
    SPECIAL MODEL SOLENOID E - ES 50 FAMILY

    1  Page

  6. N 70
    N 70

    1  Page

  7. E - ES 46 FAMILY
    E - ES 46 FAMILY

    2  Pages

  8. SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 50 FAMILY
    SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 50 FAMILY

    2  Pages

  9. SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 46 FAMILY
    SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 46 FAMILY

    2  Pages

  10. SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 60 FAMILY
    SINGLE COIL SOLENOID FOR INTERMITTENT DUTY D - DS 60 FAMILY

    2  Pages

  11. EG3 - DIESEL OIL FLOW ON/OFF 3 WAY SOLENOID VALVE FOR ENGINE STOP
    EG3 - DIESEL OIL FLOW ON/OFF 3 WAY SOLENOID VALVE FOR ENGINE STOP

    4  Pages

  12. SINGLE COIL ELECTROMAGNETS FOR PULL OR PUSH ACTION STANDARD VOLTAGE 12VDC - 24 VDC OR VOLTAGE ON REQUEST N 300
    SINGLE COIL ELECTROMAGNETS FOR PULL OR PUSH ACTION STANDARD VOLTAGE 12VDC - 24 VDC OR VOLTAGE ON REQUEST N 300

    2  Pages

  13. N 011
    N 011

    1  Page

  14. N 024
    N 024

    1  Page

  15. Q 2020
    Q 2020

    1  Page

  16. ELECTROMAGNETS FOR HOLDING AND LIFTING B TYPE- BAR SIZE
    ELECTROMAGNETS FOR HOLDING AND LIFTING B TYPE- BAR SIZE

    2  Pages

  17. ELECTROMAGNETS FOR HOLDING AND LIFTING T TYPE- CYLINDRICAL SIZE
    ELECTROMAGNETS FOR HOLDING AND LIFTING T TYPE- CYLINDRICAL SIZE

    2  Pages

  18. E- ES 50 FAMILY
    E- ES 50 FAMILY

    2  Pages

  19. DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION FOR CONTINUOUS DUTY E -ES 40 FAMILY
    DUAL COIL SOLENOID FOR PULL ACTION OR PULL-PUSH ACTION FOR CONTINUOUS DUTY E -ES 40 FAMILY

    2  Pages

  20. SPECIAL MODEL SOLENOID
    SPECIAL MODEL SOLENOID

    1  Page

  21. ELECTROMAGNETS FOR HOLDING AND LIFTING
    ELECTROMAGNETS FOR HOLDING AND LIFTING

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.