Force (Kg) Stroke (mm) DIAGRAM OF FORCES AND STROKES Rated voltage 12 V DC 24 V DC Pull current 31 A 15.2 A Hold current 0.53 A 0.29 A Duty service Continuous (100%) Stroke 40 mm Force at starting 1.7 Kg Windings insulation class H (180ذ C) Ambient temperature -40 C з 120 C Weight 0.76 Kg > Kg 1.7 (N16) 01020304051015 1 Kg = 9.81 Newtons FORCE VARIATION COEFFICIENT ACCORDINGWITH AMBIENT TEMPERATURE AMBIENT TEMPERATURE The solenoid has two windings:An intermittent-service pulling winding involved in the initial phase for approximately 150 ms, with the function of moving the plunger. A continuous-service holding winding, with the function of maintaining the plunger in position. For a proper operation of the solenoid, it is indispensable for the plunger to reach end of travel and to obtain the perfect adherence to the bottom. > 00.40.60.81.0 1.2 255075100125 AVAILABLE OPTIONSThe desired model has to be defined choosing one option in every column, building in this way the solenoid code. Versions Voltages Circuits Brackets Optional Springs Electrical connections > o C E4 pull action 1 = 12 V DC 1 = Series 1 A M1 Standard Faston ES4 pull-push action 2 = 24 V DC 2 = Series 2 B M2 F = Cables 3 = Series 3 C M3 V = Faston - screws > CORSO PRIMO LEVI, 7 - 10090 CASCINE VICA - RIVOLI - TORINO (ITALY) - TEL. 0039 0119594446 - FAX. 0039 0119591357e-mail: [email protected] www.cei-italy.it C.E.I. srl size="-2">

PULL COIL HOLD COIL FASTONCONNECTIONS BLUEL = 200 mm SCREWS > BATTERYSTARTER MOTOR STARTER RELEҒ STARTER MOTORSTARTER RELE KTP PULL COIL HOLD COIL PULL COIL HOLD COIL TP FASTONCONNECTIONS HOLD PULLRED SCREWS H = HOLD P = PULLBLUE H = HOLDP = PULL L = 200 mm > L = 45 mm UNI CLEVIS AXIAL ARTICULATEDJOINT > 90а ARTICULATEDJOINT AXIAL ARTICULATED JOINT >