Specifications:
The document describes MKP box type capacitors that are self-healing, non-inductive, and mounted on a PCB. They are used for motor run, power factor correction, filtering, and pulsed discharges. The test voltage between terminals is specified as 2 times the nominal voltage for 10 seconds. Terminals are radial tinned copper wires. The loss factor at 1 kHz is a maximum of 10 x 10^-4.

Standards:
The capacitors comply with EN 60252 VDE 560-8 standards. The dielectric material is metallized polypropylene, and the housing is a non-flammable plastic box rated UL 94 V0. Sealing is done with polyurethane resin. Tolerance levels are ±5% and ±10%. Operating temperature ranges from -25°C to +85°C.

Product Variants:
The document lists various product variants with different capacitance values, dimensions, and electrical characteristics. For example, the PB100BPP model has a capacitance of 1 µF, dimensions of 32 mm (L) x 11 mm (P) x 20.5 mm (H), and can handle a peak current of 19 A. Other models vary in capacitance from 0.5 µF to 6 µF, with corresponding changes in dimensions and current ratings.

Contact Information:
The capacitors are manufactured by SCR, located in Montierchaume, France. Contact details include a phone number, fax, and email address.