*mydirectindustry

SP75A

1 / 3 PagesView full catalog

SP75A

Product catalog summary

Specifications

Number of Channels: 1 to 2
Control Input: Voltage range from 0 to +5 V, TTL/CMOS signal, with an impedance of 100 kΩ
Output: Voltage range from -20 to +150 V, transient peak output current of ±480 mA, and a maximum output load of 400 µF
Dynamic Performance: Preshaping waveform for output signal excitation
Noise Performance: Signal to Noise Ratio of 85 dB
Protections: Overcurrent, Overtemperature, Overvoltage

Applications

Driving piezo actuators up to 2 channels for two-state switching

Key Features

Preshaping solution to reduce actuator ringing
Output voltage range of [-20 V; 150 V]
Fully protected piezo amplifier
Suitable for multi-channel configurations

Related Products

Fast Piezo Shutter
CTEC Powered benchtop case
CTEC Powered 19’’ subrack
SG75 sensors conditioners

Miscellaneous

Mass: 0.5 kg
Dimensions: 10F wide, 3U high
Warm-up Time: 15 minutes
Cooling: Forced convection
Operating Temperature Range: 0 to 40 °C
Storage Temperature Range: -10 to 50 °C

Interfaces

Order Input: BNC type
Piezo Actuator Output: LEMO EPL-00-250

Included Accessories

Piezo actuator cable (Coax 1.5m - Lemo connector / subd9)

Options

RS422 Communication: Capability to communicate two states order with differential pairs
Electrical Signals: RS422 signal, general error, voltage validation, actuator position validation
Electrical Connector: Dsub 25 Female gender
SG75 Monitoring: Position monitoring (see specific datasheet)
Piezo Cable: Specific length on request
LEMO-BNC Adapter: Converts LEMO to BNC connector

Catalog excerpts

copyright © cedrat technologies i 09/2017 www.cedrat-technologies.com | [email protected] CEDRAT ( T TECHNOLOGIES X I Innovation in Mechatronics APPLICATIONS > Piezo actuator drive up to 2 channels for two states switching KEY FEATURES > Preshaping solution for low actuator ringing > [-20 V;150 V] output voltage range > Fully protected piezo amplifier > Building block for multi channel configuration RELATED PRODUCT > Fast Piezo Shutter > CTEC Powered benchtop case > CTEC Powered 19'' subrack > SG75 sensors conditioners PARAMETER TYPICAL VALUE UNIT > Dynamic performance Type of output signal excitation Preshaping waveform > Noise performance Signal to Noise Ratio (2) 85 dB Overtemperature, Overvoltage ANNOTATIONS Guaranted in labs environement (1) Electronically limited (2) Computed as RMS output signal/ RMS output Noise floor. [1; 200]Hz

Open the catalog to page 1

copyright © cedrat technologies i 09/2017 www.cedrat-technologies.com | [email protected] CEDRAT ( T TECHNOLOGIES \ | Innovation in Mechatronics MISCELLANEOUS PARAMETER TYPICAL VALUE Mass Front face dimension Warm up time Cooling Operating temperature range (6) storage temperature range INTERFACES SP75A Order input INCLUDED ACCESSORIES Piezo actuator cable Coax 1.5m - Lemo connector / subd9 > RS422 communication Capability to communicate the two states order with differential pairs > Piezo cable Specific length on request Please contact CTEC for more detail > LEMO -BNC adapter Converts...

Open the catalog to page 2

copyright © cedrat technologies i 09/2017 www.cedrat-technologies.com | [email protected] CEDRAT ( T TECHNOLOGIES \ | Innovation in Mechatronics DRAWINGS TYPICAL PERFORMANCE CHARACTERISTICS SP75A CEDRAT TECHNOLOGIES • 59 Chemin du Vieux Chene • Inovallee • 38246 MEYLAN Cedex France • Tel. : +33 (0)4 56 58 04 00 • Fax. : +33 (0)4 56 58 04 01

Open the catalog to page 3

SP75A

SP75A

Catalog excerpts

All CEDRAT TECHNOLOGIES catalogs and technical brochures