CA45

CA45

CA45

Product catalog summary
Specifications
  • Power Supply: 110/240 VAC, 50-60 Hz, IEC C14 Inlet with switch and voltage selector.
  • Input: Control Input voltage range of -1 to +7.5 V with an impedance of 10 kΩ.
  • Output: Voltage range of -20 to +150 V, continuous peak output current of ±36 mA, and maximum output load of 400 µF.
  • Power Amplifier: Peak output power of 3 VA, gain of 20 V/V with a gain error of ±1%.
  • Dynamic Performance: Small signal bandwidth of 30 kHz, THD of 0.1%, and SNR of 85 dB.
  • Protections: Overcurrent, Overtemperature, Overvoltage.
Applications
  • 1 channel piezo drive
  • High accuracy positioning
Related Products
  • Piezo actuators and stages
  • UC45 / UC55 Controllers
  • Educational kit for active vibration control
Key Features
  • Compact standalone amplifier
  • 36mA continuous output
  • Output voltage range of [-20V;150V]
  • Low noise SNR 85dB and THD 0.1%
  • Optional strain gauge conditioner
  • Fully protected piezo amplifier
Miscellaneous
  • Mass: 1.2 kg
  • Dimensions: 89x260x129 mm
  • Operating temperature range: 0 to 40 °C
  • Storage temperature range: -10 to 50 °C
Interfaces
  • Order input: BNC type
  • Piezo actuator output: LEMO EPL-00-250
  • DC Offset: 10-turn screw potentiometer
  • Servo ON/OFF selector for control loop
Included Accessories
  • Piezo actuator cable: Coax 1.5m Lemo connector -2 banana 1mm plug
  • Strain Gauge cable (if Option SG): Shielded 1.5m
Options
  • UC45/UC55/UC65 Controller for position loop
  • Piezo cable specific length on request
  • T LEMO for connecting 2 CTEC actuators in parallel
  • LEMO-BNC adapter
SG Specifications
  • Sensor type: Full bridge, strain gauge-based, 4 wires
  • Bridge impedance: 350 Ω
  • Bridge excitation: 5 V
  • Gain span: 116 to 2700
  • Output voltage: ±10 V
  • Output current: ±20 mA
  • Bandwidth: 15 kHz
  • Resolution: 0.01% FS
  • Linearity: 0.01% FS
See more

Catalog excerpts

CA45-1

copyright © cedrat technologies i 03/2017 www.cedrat-technologies.com | [email protected] ^ CEDRAT TECHNOLOGIES Innovation in Mechatronics APPLICATIONS > 1 channel piezo drive > High accuracy positionning KEY FEATURES > Compact standalone amplifier > 36mA continuous output > [-20V;150V] output voltage range > Low noise SNR 85dB and THD 0.1% > strain gauge conditionner in option > Fully protected piezo amplifier related product > Piezo actuators and stages > UC45 / UC55 Controllers > Educational kit for active vibration control SPECIFICATIONS CA45 Linear amplifier for piezo

 Open the catalog to page 1
CA45-2

copyright © cedrat technologies i 03/2017 www.cedrat-technologies.com | [email protected] ^ CEDRAT TECHNOLOGIES Innovation in Mechatronics MISCELLANEOUS PARAMETER TYPICAL VALUE CA45 Mass External dimension Front face dimension Warm up time cooling Operating temperature range Storage temperature range kg mm min °C °C INTERFACES > Order input BNC type > Piezo actuator Output LEMO EPL-00-250 > DC Offset 10-turn screw potentiometer > Servo ON/OFF Selector for control loop INCLUDED ACCESSORIES > Piezo actuator cable Coax 1.5m Lemo connector -2 banana 1mm plug > Strain Gauge...

 Open the catalog to page 2
CA45-3

copyright © cedrat technologies i 03/2017 www.cedrat-technologies.com | [email protected] ^ CEDRAT TECHNOLOGIES Innovation in Mechatronics CA45 > SG Capability to read strain gauge sensor for position control See table below for specifications ANNOTATIONS Guaranted in labs environment (1) Electronically limited (2) AC+DC apparent power. For sine signal with offset, RMS2 is (PEAK/^2)2 + OFFSET2 (3) Unloaded (4) Computed as RMS output signal/ RMS output Noise floor. [1 ;200]Hz (5) Alternative voltage 2.5, 7.5,10Vavailable on request (6) Other values on request (7) FSO: Full Scale Output,...

 Open the catalog to page 3
CA45-4

CEDRAT TECHNOLOGIES Innovation in Mechatronics Input order Servo switch Piezo actuator connector Output SG signal connector DC SG offset (10-turn screw potentiometer) ON/OFF Piezo Power Input SG sensor connector Copyright © CEDRAT TECHNOLOGIES | 03/2017 TYPICAL PERFORMANCE CHARACTERISTICS CEDRAT TECHNOLOGIES • 59 Chemin du Vieux Chêne • Inovallée • 38246 MEYLAN Cedex France • Tel. : +33 (0)4 56 58 04 00 • Fax. : +33 (0)4 5

 Open the catalog to page 4

All CEDRAT TECHNOLOGIES catalogs and technical brochures

  1. DTT35XS-SI-2

    3  Pages

  2. DTT35XS

    3  Pages

  3. TT60SM

    3  Pages

  4. APA600M

    2  Pages

  5. APA400M

    2  Pages

  6. APA200M

    2  Pages

  7. APA150M

    2  Pages

  8. APA100M

    2  Pages

  9. APA60SM

    2  Pages

  10. APA40SM

    2  Pages

  11. APA60S

    2  Pages

  12. APA50XS

    2  Pages

  13. APA35XS

    2  Pages

  14. APA150XXS

    2  Pages

  15. PPA20M

    2  Pages

  16. PPA40M

    2  Pages

  17. PPA40L

    2  Pages

  18. PPA60L

    2  Pages

  19. PPA80L

    2  Pages

  20. PPA120L

    2  Pages

  21. PPA40XL

    2  Pages

  22. PPA80XL

    2  Pages

  23. RK42F3U-LC75B

    2  Pages

  24. LA75A

    4  Pages

  25. LA75B

    4  Pages

  26. LA75C

    3  Pages

  27. SA75A

    3  Pages

  28. SA75B

    3  Pages

  29. SA75D

    3  Pages

  30. SP75A

    3  Pages

  31. UC65

    3  Pages

  32. UC55

    3  Pages

  33. UC45

    2  Pages

  34. RK42F3U-LC24

    2  Pages

  35. ECSU10

    2  Pages

  36. ECS75

    3  Pages

  37. ECP1000

    2  Pages

  38. ECP500

    2  Pages

  39. XY25XS

    2  Pages

  40. APA30uXS

    2  Pages

  41. PPA10M

    2  Pages

  42. MISAC PROJECT

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.