mkirt GRANIT NATURSTEIN BASIC

INFORMATION How to order by telephone: +49 (0) 51 41 /88 54 -100 by email: [email protected] by telefax: +49 (0) 51 41 /88 54 -111 Our office hours are Monday to Thursday 8:00 a.m. to 4:00 p.m. Friday 8:00 a.m.to 2:00 p.m. www.cedima.com Pictograms We have indicated the intended use - which tool for which machine - in our tables with small pictograms.: angle grinders petrol-driven saws table saws block saws joint cutters It is principally possible to use dry cutting tools in wet cutting mode; this will increase the life of your CEDIMA diamond tool. wet cutting But please always observe the...

TABLE OF CONTENTS BETON BASIC for concrete slabs, general building materials, roof tiles and lime sand-stone BETON PLUS for reinforced concrete, washed-out concrete, concrete slabs, bricks, dimensional stone as well as general building materials BETON TURBO for reinforced concrete, concrete slabs, artificial- and natural stone, general building materials, soft to medium hard granite GRANIT NATURSTEIN BASIC or granite, concrete, washed-out concrete, clinker, bricks, roof tiles, artificial stone slabs, general building materials GRANIT NATURSTEIN PLUS for granite, hard natural stone, concrete,...

Order no 0 Segment No. of Bore hole BETON PLUS Use for concrete slabs, general building materials, roof tiles and lime sand-stone. With turbo segments. Use for reinforced concrete, concrete slabs, artificial- and natural stone, general building materials, soft to medium hard granite. Special segment shape, enables extremely fast cutting.

UPmCuT Use for granite, concrete, washed-out concrete, clinker, bricks, roof tiles, artificial stone slabs, general building materials. With continuous cutting rim! Use for granite, hard natural stone, concrete, washed-out concrete and basalt. With turbo segments. Use for reinforced concrete, washed-out concrete, concrete slabs, artificial and natural stone, clinker, glazed tiles, ceramics and general materials, also for a clean cut of plasterboard and profile sheet plates. With continuous cutting rim!

Order no 0 Segment No. of Bore hole Use for asphalt, lime sand-stone and other abrasive materials. With protective segments for a long life time! o. 0 Segment No. of Bore hole Use for asphalt, sand-stone, green concrete and other abrasive materials. Use for the universal operation in soft concrete and other abrasive materials like asphalt, green concrete and floor pavement. BETON ASPHALT KOMBI

n . „„ 0 Cutting rim Bore hole Use for tiles, glazed tiles, stone ware and thin slabs of natural stone. Continuous cutting rim for excellent quality of cutting edges! n . „„ 0 Cutting rim Bore hole Use for tiles, hard artificial and natural stone, ceramic, clincker and vitreous refractory material.

Use for concrete, lime sand-stone, gross density < 2 and shaped paving stone.

o. 0 Segment No. of Bore hole Use for removing mortar out of wall joints and working in other abrasive materials and concrete. 0 Segment No. of Bore hole *) Inner / outer segments Use for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials. Use for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials. Use for cutting of cable shafts in concrete, floor finish, lime sand-stone, plaster, mortar, masonry, bricks, plaster board. • for indoor and outdoor areas (ceilings, floors, walls) • for removing mortar and plaster...

Drill bit for making openings for flush-mounted sockets or distribution boxes. Use for masonry, lime sand-stone, Poroton and other abrasive materials. • connection M-16 inside thread • with turbo segments Delivery ind. 1 hexagon receptacle for standard drill chuck With angle grinder connection M14 Use for accurate bores for connection openings and drains in the sanitary area, for sockets and junction boxes in the electrical area, in carbon and GRP components in boat or model construction. Application in tiles, ceramics, stoneware, vitreous refractory material.

BK BETON TURBO PLUS drill bits Order-no. LR5ER )* 0 250 mm with soldered segments! Universal drill bit for the operation in concrete and reinforced concrete (up to medium shares of reinforcement) • high feed and long life time • conditionally applicable in dry cutting • turbo segments

hard clinkers, paving stones heavy ceramics natural stone (granite, gneiss etc.) artificial stone, polymer concrete reinforced concrete cured concrete washed-out concrete curb stones paving concrete concrete full brick high density lime sand-stone lime stone (marble, terrazzo etc.) roof tiles slate fibre-glas plastics plaster board clay bricks aerated concrete refractory material, porous lime sand-stone, gross density < 2 poroton masonry sand-stone floor finish mortar asphalt green concrete profile sheets ■ very applicable ■ well applicable ■ BK BETON TURBO PLUS drill bits DS PLUS socket bits...