2700 Precision Signal Source Applications • Vibration Monitoring System • Test Cell Instrumentation • Field Test Systems • Test Engineering and R & D Facilities • Control Instrumentation Features • Low impedance AC or DC millivolt output • Average, RMS, or Peak units • Four-digit LCD readout • Operates with AC or battery power Description Designed to calibrate instrumentation systems, the portable CEC 2700 Precision Signal Source provides accurate signals that simulate charge or millivolt outputs from piezoelectric accelerometers or other motional transducers. This portable instrument is easy to set-up and use. Unlike other fixed-setting calibrators, the CEC 2700 lets you calibrate systems at specific test or operating conditions because you can adjust the frequency and output level to any value within their range. Also, you can convert between units of acceleration, velocity and displacement when calibrating vibration systems. The heart of the CEC Precision Signal Source is a microprocessor-based quartz crystalcontrolled synthesized oscillator. It is adjustable in 0.1 Hz increments from 10.0 to 9999.9 Hz using the five-digit front panel thumbwheel switch. All outputs are derived from this stable and accurate oscillator. Output levels are set at the front panel with the COARSE and FINE OUTPUT ADJUST controls. The differential and single-ended charge outputs are developed from the oscillator, and an A/D voltage converter supplies the DC millivolt output. ISO 9001:2000 AS9100 Certified CEC Vibration Products • 746 Arrow Grand Circle • Covina, California 91722 • USA (626) 938-0200 • (800) 468-1345 • Fax: (626) 938-0202 • www.cecvp.com Monitoring Systems • Differential or single-ended charge output

2700 Precision Signal Source Performance Specifications Ordering Information Charge Output: Available as single-ended and differential, the output is a sinewave at the RPM rate (Hz = RPM/60) To order the CEC 2700 Precision Signal Source, contact your local CEC representative or CEC directly. The instrument includes AC powercord, NiCad batteries and operator’s manual. Cables are sold separately. Charge Capacitance: 1000 picofarads ±3.5% AC Millivolt Output: Single-ended sinewave at the RPM rate. Impedance is 50 Ω. Maximum output current is 10 mA. Output Units: Selected by a front panel control...