Specifications:
The POWER PLASMA 2025/M operates on a single-phase input of 230V at 50/60 Hz with a voltage tolerance of +15% / -20%. It requires a slow blow fuse rated at 10A and has an input power of 2.3 KVA at 25%, 1.8 KVA at 60%, and 1.6 KVA at 100% duty cycle. The current adjustment range is between 5A and 20A, with a duty cycle of 20A at 25%, 18A at 60%, and 15A at 100% according to IEC 60974.1 standards. The device features stepless electronic regulation and can cut steel with recommended thicknesses of 6-8 mm, with a maximum of 10 mm for severance. The torch length is 4 meters, and it consumes air at 55 liters per minute at 3.5 bar. The protection class is IP 23 S, and the unit weighs 9.4 kg with dimensions of 171x390x340 mm.

Features and Benefits:
The POWER PLASMA 2025/M is designed for ease of use and portability, weighing only 9.4 kg including the torch. It operates with minimal system requirements, needing only 2.3 KVA at maximum power, and provides excellent cutting quality on all metals. The device uses compressed air at 3.5 bar with a consumption of 55 l/min, making it compatible with a 25-liter compressor. It features a pilot arc "on air" mode for cutting painted or coated metals and is equipped with a Cebora CP41C plasma cutting torch with "on air" ignition without high frequency. The unit has high electromagnetic compatibility per IEC 60974-10, allowing use near electronic equipment. It includes explosion-proof protection for the air reducer unit and complies with EN 61000-3-12 for energy savings and voltage tolerance. It can also be powered by motor-driven generators with a minimum power of 4KVA.