*mydirectindustry

Model EW100/A

Product catalog summary

Model Overview: The EW100/A is a high-pressure water washing equipment designed for cleaning the interiors of open tanks and Intermediate Bulk Containers (IBCs). It operates at pressures of 250 or 400 bar.

Main Technical Features:

Applicable Models: EW100/Ac, EW100/Av, EW100/Acv
Insulation: IP55
Control System: PLC SIEMENS S7/1200
Compressed Air Requirement: 7 Bar
Power Supply: 3x400 V – 50 Hz (customizable)
Installed Power: 39 kW at 400 bar, 20 kW at 250 bar
Motor Power: 37 kW at 400 bar, 18.5 kW at 250 bar
Washing Media: Water, water with detergents, detergents, sanitizers
Washing Pressure: Adjustable between 250 and 400 bar
Flow Rate: 45 lit/min at 400 bar, 37 lit/min at 250 bar
Temperature: Max 40°C to 70°C
Pumps: High-pressure washing and rinsing pumps, double diaphragm emptying and feeding pumps
Loading Cage: Equipped with a tilting platform
Sealing Options: Cone and flange models available
Vessel Dimensions: Diameter from 800mm to 1600mm, height from 900mm to 1650mm
Filters: Two stainless steel filters for liquid and pump protection
Washing Time: Cycle time selectable, typically 3 to 5 minutes
Safety Devices: Sensors for cover lowering, washing liquid flow, compressed air, and cleaning media flow

Sealing and Tank Sizes:

EW100/Av: For open tanks
EW100/Ac: For IBCs
EW100/Acv: For both open tanks and IBCs
Open Tank Sizes: Diameter from 800mm to 1650mm, height up to 1950mm
IBC Sizes: Hole diameter from 150mm to 250mm, height up to 1950mm

Layout and Recommendations: Users are advised to verify technical requirements and container dimensions with CEB Impianti before using the washing machine. The layout provided is indicative.

Contact Information: CEB Impianti S.r.l., via Stab. Figliodoni, 14 - 23891 Barzanò (LC) - Italy. Tel: +39 039 958482, Fax: +39 039 9217563, Email: [email protected]

Catalog excerpts

C.E.B. IM PI ANTI s.n.1. IMPIANTI Dl LAVAGGIO PER L’INDUSTRIA WASHING PLANTS FOR INDUSTRY Model EW100/A HIGH PRESSURE (at 250 or 400bar) WATER WASHING EQUIPMENT suitable for inside washing of open tanks and IBCs via Stab. Figliodoni, 14 - 23891 Barzano (LC) - Italy Tel. +39 039 958482 - Fax +39 039 9217563 www.cebimpianti.com - [email protected] VAT Nr. 02652530961

Open the catalog to page 1

www.cebimpianti.com [email protected] MAIN TECHNICAL FEATURES Appliable to models Technical features may change without prior notice. Consult with CEB Impianti for the latest version available.

Open the catalog to page 2

www.cebimpianti.com [email protected] for open tanks and IBCs TANK SIZES ON EW100: Open tank vessels Ø Tank 800mm ~ 1450mm (31,5” ~ 57”) Up to 1550mm (61”) Up to 1650mm (65”) Height (without wheels) 900mm ~ 1650mm (35,5” ~ 65”) Height (with wheels) Up to 1950mm (76,77”) NOTE: • with minimal distance from floor of 150mm (2”) • Tanks must be equipped with bottom drain valve on the side at 3” 1000lt IBCs in HDPE Ø Hole 150mm ~ 250mm (2” ~ 57”) Height International standards, but accepted up to 1950mm (76,77”) NOTE: • Tanks must be equipped with bottom drain valve on the side at 3” 1000lt IBCs...

Open the catalog to page 3

www.cebimpianti.com [email protected] LAYOUT (indicative) Check your technical request and the dimensions of your containers with CEB Impianti before considering the use of the present washing machine CEB Impianti S.r.l. via Stab. Figliodoni, 14 - 23891 Barzanò (LC) - Italy Tel. +39 039 958482 - Fax +39 039 9217563 VAT Nr. 02652530961 February 2019 – Rev. A page 4 of 4

Open the catalog to page 4

All C.E.B. IMPIANTI S.r.l. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list