Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. CDS Cam Driven Systems
  3. TRW Index table with SEW motoreducer
video corpo

TRW Index table with SEW motoreducer

TRW Index table with SEW motoreducer
1 / 52 PagesView full catalog

TRW Index table with SEW motoreducer

Product catalog summary
Technical Specifications:
The document outlines specifications for index tables with SEW motoreducer, available in sizes from 110 to 850. Housing materials include aluminum and cast iron alloys with finishes like electroless nickel plating and red paint. Features include multiple stops, a large output flange, stationary center-post through-hole, and CNC induction hardened cam-profiles. They are lubricated for life with an oil bath and have a guaranteed sealing system.
Repeatability:
Repeatability is illustrated in Diagram 'A', showing the relationship between repeatability and dial plate diameter. Table 'A' provides maximum dial plate diameters for each model.
Loads on Output Flange:
Details on axial and radial forces, and the overturning moment the output flange can handle are provided, along with formulas for calculations.
Sizing Software:
An Excel file is available for sizing applications, helping users determine the appropriate model.
Cycle Times and Motor Power:
Cycle times for continuous motion and cycle-on-demand applications are discussed, considering electronic equipment delays. Motor power specifications are provided for 50-60 Hz operations.
Optional Features:
Optional features include E-CAM electronic phase cam, proximity sensors, phase cams, fixed and rotating piece holder disks, and protection systems.
Diagrams and Tables:
Diagrams and tables illustrate technical data, repeatability, and load capacities, providing a visual representation of the index tables' specifications and capabilities.
Specifications:
Detailed specifications for TRW models (110 to 850) are provided, including maximum inertia (Jmax) and cycle time (ts) for different configurations.
Procedures:
Dynamic braking with an inverter is recommended for optimal performance during emergency stops, with minimum deceleration time calculated using sizing software.
Standards and Recommendations:
Cycle time 'ts' is specified for continuous motion applications, with adjustments needed for cycle-on-demand applications due to electronic equipment delays.
Key Data from Tables:
Tables provide Jmax and ts values for each TRW model and configuration, highlighting the importance of using correct order codes for compatibility and performance.
Specifications and Cycle Time:
Cycle time 'ts' and maximum application inertia (Jmax) are provided for TRW models, with specific order codes for different inertia and cycle time values.
Recommendations for Emergency Stops:
Dynamic braking with an inverter is recommended for emergency stops, with deceleration time calculated using sizing software.
Data Tables:
Tables list maximum application inertia (Jmax) and cycle time (ts) for each TRW model, aiding in precise selection based on application needs.
Specifications and Recommendations:
Dynamic braking using an inverter is recommended for emergency-stop conditions, with deceleration time calculated using sizing software.
Cycle Times with Motoreducer:
Cycle times for TRW models at 50 Hz and 60 Hz frequencies are detailed, including reduction ratio, reducer speed, cycle time, and index time for different stop scenarios.
Motor Power:
Motor power specifications for each TRW model at 50 Hz and 60 Hz, with power ratings from 0.18 kW to 37.00 kW.
Designations and Features:
Details on designations like rotating piece holder disk, fixed disk, torque limiter options, and frequency specifications are included.
Tolerances and Dimensions:
Tolerances are specified according to UNI - ISO 2768-1 and EN 22768-1 standards, with dimensions and tolerances for concentricity, planarity, accuracy, and threaded holes position.
Technical Specifications:
Specifications for components include dimensions, weights, and tolerances, with maximum dimensions in millimeters and weights from 490 kg to 3520 kg.
Procedures and Functionality:
The E-CAM Motor Management System manages motor rotation and stop, optimizing cycle time and providing diagnostics.
Recommendations:
For safe e-stop management, a VFD/inverter is recommended as the static relay switch does not safely restart the motor after an e-stop.
Benefits and Features:
The E-CAM system optimizes cycle time, improves indexer lifetime, provides diagnostics, and ensures accurate motor stops.
Additional Information:
A video is available on the company's website for further details.
Specifications and Components:
CDS synchronous torque limiters detect load threshold exceedance, providing protection against impacts and overloads.
Operation and Safety:
Torque limiters disengage when torque exceeds calibration, with a sensor detecting intervention. Not designed as a safety device.
Technical Data:
Tables list torque limiter models with specifications like dimensions and technical details.
Global Presence and Contact Information:
Contact information for GATE Technologies Inc. and global offices is provided, along with details on Bettinelli Automation Components Pvt. Ltd. and CDS - Cam Driven Systems.
See more

Catalog excerpts

TRW Index table with SEW motoreducer-1

INDEX TABLE with SEW motoreducer TAVOLE ROTANTI con motoriduttore SEW INDEXIERTE DREHTISCHE mit SEW Getriebemotor TABLES ROTATIVES avec moto-réducteur SEW MESAS GIRATORIAS con motorreductor SEW 分度转台（配 SEW 减速器）

 Open the catalog to page 1
TRW Index table with SEW motoreducer-2

This catalogue cancels and replaces any preceding issue or revision. The data provided in the catalogue are not binding; in line with our commitment to on-going product improvement, we reserve the right to make changes without prior notice. The technical data not present in this catalog are available from our technical office. When in doubt, you are welcome to download the latest up-to-date version available on our web site: www.cdsindexers.com Importante Questo catalogo annulla e sostituisce ogni precedente edizione o revisione. I dati esposti nel catalogo non sono impegnativi e ci riserviamo...

 Open the catalog to page 2
TRW Index table with SEW motoreducer-3

 Loads on output flange  Tiempos de ciclo con  输出法兰负载 motorreductor  Cycle times with motoreducer 50-60 Hz  Tempi di ciclo motoriduttore 50-60 Hz  Temps de cycle avec motoreducteur 50-60 Hz  Tiempos de ciclo con  循环时间（配电机减速 器） 50-60 Hz motorreductor 50-60 Hz  E-CAM Electronic phase cam  E-CAM Camma di fase elettronica  E-CAM Elektronischer  E-CAM Came de Phasennnocken phase électronique  E-CAM Leva de fase electrónica  E-CAM wiring connection  Schema collegamento  Verkabelungsschema  Connexion de câblage  Conexión de cableado  E-CAM线路连接 E-CAM E-CAM E-CAM E-CAM  Proximity sensors...

 Open the catalog to page 3
TRW Index table with SEW motoreducer-4

Grandezze: • 110 carcassa in lega d’alluminio • 160-210 carcassa in fusione di ghisa, nichelatura chimica • 315-400-470-600-700-850 carcassa in fusione di ghisa, verniciatura rosso RAL3000 Größen: • 110 Gehäuse aus Aluminiumlegierun • 160-210 Gehäuse aus Gusseisen, vernickelt • 315-400-470-600-700-850 Gehäuse aus Gusseisen, lackiert rot RAL3000 • Large output flange for an easy connection to the dial plate. Output dial mounting flange supported by oversized preloaded cross-roller bearing • Stationary center-post through-hole • Maximum station-to-station accuracy • CNC induction hardened cam-profiles...

 Open the catalog to page 4
TRW Index table with SEW motoreducer-5

Dimensiones: • 110 carcasa de aleación de aluminio • 160-210 carcasa de fundición, nichelatura chimica • 315-400-470-600-700-850 carcasa de fundición, pintura roja RAL3000 REPETITIVITE Le diagramme ‘A’ fournit la répétitivité en fonction du diamètre du disque appliqué. Le tableau ‘A’ montre le Ø max. du disque recommandé. TABLE A Max dial plate Ø [mm] • Brida de salida de movimento para facilitar el acoplamiento de los platos. Salida de movimiento de fijación a rodamiento sobredimensionado en cojinete de rodillos cruzados • Cubo central fijo con gran agujero central listo para ser usado • Máxima...

 Open the catalog to page 5
TRW Index table with SEW motoreducer-6

PROGRAMMA DI DIMENSIONAMENTO Per un più facile dimensionamento dell’applicazione, è possibile utilizzare un foglio elettronico formato Excel disponibile sui ns. siti nella sezione download. SIZING SOFTWARE To easily size the application, an Excel file is available for download from our web sites. LASTEN AUF DEM TEILGERÄT Fa = Längskraft (N) Fr = Radialkraft (N) Mr = Kippmoment (Nm) b, dr = Abstand (m) Mr = Fr . dr Mr = Fa . b CARICHI SUL DIVISORE Fa = Forza assiale (N) Fr = Forza radiale (N) Mr = Momento ribaltante (Nm) b, dr = Distanza (m) Mr = Fr . dr Mr = Fa . b LOADS ON OUTPUT FLANGE Fa =...

 Open the catalog to page 6
TRW Index table with SEW motoreducer-7

PROGRAMA DE DIMENSIONAMIENTO Para que el dimensionamiento de la aplicación sea más fácil, es posible utilizar una hoja electrónica en formato Excel, disponible en nuestros sitios Web en la sección de descarga. Motor type 为了更方便的定制应用，可以从我们的 网站直接下载选型 Excel 文件。 Torque limiter PROGRAMME DE DIMENSIONNEMENT Pour un dimensionnement plus facile de l’application, il est possible d’utiliser un fichier électronique en format Excel disponible sur nos sites à la section ‘Téléchargement’. CARGAS EN EL DIVISOR Fa = Fuerza axial (N) Fr = Fuerza radial (N) Mr = Momento de vuelco (Nm) b, dr = Distancia (m) Mr =...

 Open the catalog to page 7
TRW Index table with SEW motoreducer-8

ts cycle time Jmax application inertia ts ciclo Jmax inercia de aplicación ts 循环时间 Jmax 应用惯量 ts tempo di ciclo Jmax inerzia applicazione ts Zykluss-Zeit Jmax Trägheit Anwendung ts cycle Jmax inertie application INERTIA INERZIA TRÄGHEIT INERTIE INERCIA 惯量 Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code The cycle time ‘ts’ is for continuous motion. For cycle-on-demand applications the value ‘ts’ is affected by the delay of the electronic equipments...

 Open the catalog to page 8
TRW Index table with SEW motoreducer-9

ts cycle time Jmax application inertia ts ciclo Jmax inercia de aplicación ts 循环时间 Jmax 应用惯量 ts tempo di ciclo Jmax inerzia applicazione ts Zykluss-Zeit Jmax Trägheit Anwendung ts cycle Jmax inertie application INERTIA INERZIA TRÄGHEIT INERTIE INERCIA 惯量 Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code • For optimum performance of the unit in the emergency-stop condition, we recommend dynamic braking using an inverter, with minimum deceleration time calculated using our sizing software...

 Open the catalog to page 9
TRW Index table with SEW motoreducer-10

ts cycle time Jmax application inertia ts ciclo Jmax inercia de aplicación ts 循环时间 Jmax 应用惯量 ts tempo di ciclo Jmax inerzia applicazione ts Zykluss-Zeit Jmax Trägheit Anwendung ts cycle Jmax inertie application INERTIA INERZIA TRÄGHEIT INERTIE INERCIA 惯量 Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code Order code The cycle time ‘ts’ is for continuous motion. For cycle-on-demand applications the value ‘ts’ is affected by the delay of the electronic equipments...

 Open the catalog to page 10

All CDS Cam Driven Systems catalogs and technical brochures

  1. HT Ring table
    HT Ring table

    20  Pages

  2. IG-IGA Roller gear index drives
    IG-IGA Roller gear index drives

    41  Pages

  3. TRP Index table
    TRP Index table

    52  Pages

  4. IT Mechanical index tables
    IT Mechanical index tables

    34  Pages

  5. TR Mechanical index tables
    TR Mechanical index tables

    45  Pages

  6. MHP Rotary parts-handlers
    MHP Rotary parts-handlers

    23  Pages

  7. GT Technical Guide
    GT Technical Guide

    43  Pages

  8. HTR Servo Rotary Positioning Tables
    HTR Servo Rotary Positioning Tables

    2  Pages

  9. CR Cycloidal reducers
    CR Cycloidal reducers

    20  Pages

  10. TSL-TL-TXL Precision link conveyor
    TSL-TL-TXL Precision link conveyor

    45  Pages

  11. TCR Cycloidal table
    TCR Cycloidal table

    20  Pages

  12. CPC Chain pallet conveyors
    CPC Chain pallet conveyors

    52  Pages

  13. LA Linear actuator
    LA Linear actuator

    24  Pages

  14. FTP Ring table
    FTP Ring table

    24  Pages

  15. FT Ring table
    FT Ring table

    24  Pages

  16. MCR pick & place unit
    MCR pick & place unit

    24  Pages

  17. EL Part Elevator
    EL Part Elevator

    28  Pages

  18. Products brochure
    Products brochure

    25  Pages

  19. IP Parallel index drives
    IP Parallel index drives

    26  Pages

  20. ITP Index table
    ITP Index table

    48  Pages

  21. LHP Linear parts-handlers
    LHP Linear parts-handlers

    17  Pages

  22. HP Index tables for complex movements
    HP Index tables for complex movements

    27  Pages

  23. CU Tool changer
    CU Tool changer

    20  Pages

  24. CPT Pallet changer
    CPT Pallet changer

    20  Pages

  25. MUL Linear tool magazine
    MUL Linear tool magazine

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.