TL - 31 Pages

Add to MyDirectIndustry favorites
TL

Catalog excerpts

Precision link conveyor Transmission Directions of rotation Protection systems Custom capability Technical data Overall dimensions Options Transportador lineal de precision Transmision Sentidos de rotation Sistemas de protection Posibilidades del sistema Datos tecnicos Dimensiones generales Opciones

 Open the catalog to page 1

LINEAR CONVEYOR Better built to suit the PRODUCTIVITY, DURABILITY and FLEXIBILITY needed for a modem automation. The modular design of the "TL” conveyors combine excellent ACCURACY and SPEED capability with maximum VERSATILITY ACCURACY Special chain with cast-iron alloy precision links machined to the highest accuracy standards and protected with chemical nickel plating. Hardened and ground pivotal and sliding elements. Constant chain tension is guaranteed by chordal compensation cams. SPEED The CDS Index drive type IGA allows a high number of cycles per minute with vibration free motion....

 Open the catalog to page 2

TRANSMISSION - TRANSMISION SYNCHRONOUS DRIVE The Conveyor works in mechanical synchronization with other machine parts, deriving its own movement from the main machine drive. The degrees engaged for the INDEX period, which is normally the passive part in the machine cycle, will be equivalent to the minimum essential limit required by the Indexer to perform the output displacement. Having more degrees engaged in the DWELL period, is an advantage to the active part of the machine cycle. INDEPENDENT DRIVE Synchronism is obtained with a start/stop signal originated from the Indexer cam-shaft....

 Open the catalog to page 3

TORQUE LIMITER ON THE INPUT CAM SHAFT AND MOTOR CONTROL The picture shows two common protection devices. Type A is a torque limiter mounted on the input shaft, or built in the reducer. The most relevant characteristics are compact dimensions and mechanical simplicity. It can protect the reducer and partially the Indexer. Type B is based on the dynamic control of the motor. In case of emergency it is possible to adjust the stop time and create an controlled and safe deceleration ramp. In this way the dynamic overload on mechanical parts of the conveyor and its transmission is substantially...

 Open the catalog to page 4

CUSTOM CAPABILITY - POSIBILIDADES DEL SISTEMA To better suit our Customers' needs, CDS can design and manufacture entire MACHINE SUB-SYSTEMS, ready for final tooling, which integrates : PARTS HANDLERS, auxiliary INDEX DRIVES, CUSTOM CAMS to drive SPECIAL MECHANISMS; working either in mechanical synchronization or with independent drives. CDS reliability in every component ensure the highest performance and durability for your in-line automation application. Para responder mejor a las exigencias de los clientes, CDS puede proyectar bases de mbquina, con la integracidn de: MANIPULADORES...

 Open the catalog to page 5

CUSTOM CAPABILITY - POSIBILIDADES DEL SISTEMA

 Open the catalog to page 6

Consult CDS's engineering department to define the custom alterations required or for the entire Machine Sub-systems Para definir las posibles personalizaciones o, en su caso, toda la base de la mdquina, consultar al servicio de ingenieria de CDS.

 Open the catalog to page 7

INDEX DISTANCE ACCURACY P± [MM] PRECISION SOBRE EL PASO P± [MM] LOAD CAPACITY N (Number of links parallel on same plane) N (Numero de eslabones paralelos y coplanares) '!<-1-►! Mr = Overturning moment [Nm]    Mr = Momenta de vuelco [Nm] Note: Consult CDS engineering department for further details. Nota: Para mayores detalles, consultar al servicio tacnico de CDS

 Open the catalog to page 8

Number of links parallel on same plane • Numero di maglie parallele e complanari Anzahl paralleler und planlaufender Paletten • Nombre de maillons total sur les parties droites Número de eslabones paralelos y coplanares Link detail • Dettaglio maglia • Palettenglieder Ausschnitt • Détail maillon • Detalle del eslabón ACCESSORY: ALUMINIUM PIECE HOLDER ACCESSORIO: SQUADRA IN ALLUMINIO ZUBEHOR: ALUMINIUM WERKSTÜCKAUFNAHME ACCESSOIRE: EQUERRE EN ALUMINIUM ACCESORIO: ESCUADRA DE ALUMINIO INDEX DISTANCE Stops Please consult CDS to recommend appropriate index drive and for longer lengths •...

 Open the catalog to page 9

Area available on each element for tooling through opening • Area disponibile in ogni modulo per lavorazioni o per apertura passante • Verfugbar sind Werkzeuge oder Offnungen auf den einzelnen FJachen der Elementen • Surface disponible sur chaque module pour montages appuis de E xation ou passage • Area disponible en cada modulo para elaboracion o apertura pasante INDEX DISTANCE

 Open the catalog to page 10

Number of links parallel on same plane • Numero di maglie parallele e complanari Anzahl paralleler und planlaufender Paletten • Nombre de maillons total sur les parties droites Número de eslabones paralelos y coplanares Link detail • Dettaglio maglia • Palettenglieder Ausschnitt • Détail maillon • Detalle del eslabón Area available on each element for tooling through opening • Area disponibile in ogni modulo per lavorazioni o per apertura passante • Verfügbar sind Werkzeuge oder Öffnungen auf den einzelnen Flächen der Elementen • Surface disponible sur chaque module pour montages appuis de...

 Open the catalog to page 11

INDEX DISTANCE Please consult CDS to recommend appropriate index drive and for longer lengths • Consultare CDS per determinare la corretta unita index e per lunghezze superiori • CDS gibt germe Auskunft uber die Getriebetypen und fur groBere Langen • Pour determiner l'indexeur correct et pour des longueurs superieure s'adresser au CDS • Consultar a CDS para determinar la correcta unidad index y para longitudes mas largas

 Open the catalog to page 12

TL 75 N Number of links parallel on same plane • Numero di maglie parallele e complanari Anzahl paralleler und planlaufender Paletten • Nombre de maillons total sur les parties droites Número de eslabones paralelos y coplanares Link detail • Dettaglio maglia • Palettenglieder Ausschnitt • Détail maillon • Detalle del eslabón Area available on each element for tooling through opening • Area disponibile in ogni modulo per lavorazioni o per apertura passante • Verfügbar sind Werkzeuge oder Öffnungen auf den einzelnen Flächen der Elementen • Surface disponible sur chaque module pour montages...

 Open the catalog to page 13

All CDS Cam Driven Systems catalogs and technical brochures

  1. FTP

    20 Pages

  2. EL

    28 Pages

  3. ITP

    44 Pages

  4. TRP

    48 Pages

  5. CR

    20 Pages

  6. TCR

    20 Pages

  7. TRW

    24 Pages

  8. HTR

    2 Pages

  9. FT

    16 Pages

  10. IT

    27 Pages

  11. TR

    35 Pages

  12. IP

    17 Pages

  13. IG

    30 Pages

  14. HP

    16 Pages

  15. MHP

    19 Pages

  16. LHP

    17 Pages

  17. LA

    10 Pages

  18. CU

    20 Pages

  19. CPT

    20 Pages

  20. MUL

    8 Pages

  21. HP-catalogue

    15 Pages

Archived catalogs

  1. LHP-catalogue

    16 Pages

  2. IT-catalogue

    27 Pages

  3. IP-catalogue

    17 Pages

  4. IG-catalogue

    29 Pages