IP - 17 Pages

Add to MyDirectIndustry favorites
IP

Catalog excerpts

Parallel index drives    2 Loads on input shaft    3 Dimensions - Light duty series    8 Dimensions - Heavy duty series    9 Cycle times with motoreducer - 50 Hz - 60Hz 15 Reducer matching table    16 Working position - lubrication    17 Indexadores Ejes Paralelos Cargas admisibles en los ejes entrada Datos tecnicos Tarnaho serie ligera Tarnaho serie pesada Funcidn intermitente Funci6n como oscilador Accessorios - fabricaciones especiales Limitador de par - GRL Fabricaciones especiales Tiempos de cido con motorreductor 50 Hz 60 Hz Acoplamiento motorreductor Posicidn de montaje Posicidn de trabajo y lubricacion Identificacion caras unidades

 Open the catalog to page 1

- Airtight special aluminum alloy housing - Universal mounting positions - CNC induction hardened cam profiles - Yoke-mounted cam followers - Eccentric bushing for pre-load adjustment between cam and followers - Oscillating and customized cam motion available - Long-life lubrication; guaranteed sealing system in any working position - Worm gear reducer and motor mount directly Size = Distance between input and output drive axis IP - Heavy duty series Sizes: 165 200 250 Stops : 1 - 2- 3- 4- 6- 8 Special stops: 0.6 - 0.75 -1 -1.33 -1.5 - 2 - 5 -10 - Airtight cast-iron alloy housing - Flanged...

 Open the catalog to page 2

LOADS ON INPUT SHAFT Fre = Input radial Force (N) Me = Input Torque (Nm) The diagrams show the curves relating to maximum (Fre/Me) values for the input shaft of the various index drives. The values shown are referred to a rotation speed of 100 rpm of the cam shaft. CARGAS EN EL EJE DE ENTRADA Fre = Fuerza Radial Entrada (N) Me = Momenta de Torsidn Entrada (Nm) Los diagramas detallan las curvas relativas a los valores mdximos de (Fre/Me) por eje de entrada de los diferentes indexadores. Los valores indicados se refieren a una velocidad de rotacidn del eje de 100 rpm.

 Open the catalog to page 3

TECHNICAL DATADATOS TECNICOS Type

 Open the catalog to page 4

(•) Starting torque - Tolerance on the values indicated ± 15% Values referred to the worst running conditions Equivalent service factor = 1.75 already applied * Double cycle cam configuration (see page 10 ) The schedules show some minimum and intermediate reference values. Also possible :    - Number of stops not Indicated in the schedule. - Index angles not Indicated In the schedule. - Different and Customized Motion. Las tablas aportan algunos valores mfnimos e Intermedlos de referenda. Se pueden reallzar:    -Numero de dlvislones no Induidas en la tabla. -Angulos de leva no induidas en...

 Open the catalog to page 5

SPECIAL EXECUTIONS FABRICACIONES ESPECIALES Type

 Open the catalog to page 6

(•) Starting torque - Tolerance on the values indicated ± 15% Values referred to the worst running conditions Equivalent service factor = 1.75 already applied * Double cycle cam configuration ( see page 10 ) The schedules show some minimum and intermediate reference values. Also possible :    - Number of stops not Indicated In the schedule. - Index angles not Indicated In the schedule. - Different and Customized Motion. Las tablas aportan algunos valores mlnimos e intermedios de referenda. Se pueden realizar:    -Numero de divisiones no incluidas en la tabla. -Angulos de leva no incluidas...

 Open the catalog to page 7

ATENClON La posIdCn de las chavetas que se details en el piano se refiere a la mitad del bngulo de parade de la unidad Output rotating element - Elemento de Giro en salida General manufacturing tolerances in compliance with UNI-ISO 2768-1 EN 22768-1 Tolerancias generates de fabricacibn con aneglo a UNI-ISO 2788-1 EN 22768-1 NOTE: The position of the keys indlrated on the drawing is referred to the middle of the dwell angle.

 Open the catalog to page 8

ATENClON La posicibn de las chavetas que se details en el piano se refiere a la mitad del Sngulo de parada de la unldad NOTE: The position of the keys indicated on the drawing is referred to the middle of the dwell angle. Output rotating element - Elemento de Giro en salida General manufacturing tolerances in compliance with UNI-ISO 2768-1 EN 22768-1 Tolerancias generates de fabricacibn con arreglo a UNI-ISO 2768-1 EN 22768-1 External INPUT shaft - Enganchar eje ENTRADA UNI 7510 , T, SERIES (CAD file reference) The empty boxes indicate the possibility to specify the required dimension. Las...

 Open the catalog to page 9

DIRECTIONS OF ROTATIONS For unidirectional running only the (A-C) and (B-D) combinations are possible. These can be obtained by rotating the cam shaft in the directions shown. SINGLE CYCLE CAM The diagram on the side shows the displacement of an index drive having a single cycle cam. In a 360° rotation of the cam shaft the phases are: 1) index 2) dwell = The camshaft keyway oriented to the output shafts identifies the middle position of Dwell period (1/2 a2) The indications on the side refer to the preliminary coding. DOUBLE CYCLE CAM The diagram on the side shows the displacement of an...

 Open the catalog to page 10

DIRECTIONS OF ROTATIONS ON CYCLE START Possible combinations: (A-C) (B-C) (A-D) (B-D) By convention the beginning of the cycle coincides with the first" displacement (1) Under the company standard, the values of 5 and y, the angle for the key of the cam shaft and the angle for the key of the output shaft are both equal to 0 (zero) at the center of the first dwell phase. The keys are oriented as in the drawing on the side. This position is identified as a phase axis. In case of specific necessity it is possible to indicate the values for the § angle and the y angle referred to the required...

 Open the catalog to page 11

REDUCERS AND MOTORS Index drives can be fitted with reducers and motors of various types. The possibilities to fit directly the worm gear reducers . are shown on page 16. Overall dimensions are detailed in CDS DXF Files. LENGTH / DIAMETER of input cam shaft Page. 14 LENGTH / DIAMETER of output shaft Page. 14 LONGITUD-DIAMETRO eje de salida Pag. 14 REDUCTORES Y MOTORES Los indexadores IP pueden estar dotados de reductores y motores de varios tipo. Las posibilidades de montaje directo de reductores de tornillo sin fin se detallan en la pag.16 La comprobacidn de las dimensiones generales es...

 Open the catalog to page 12

All CDS Cam Driven Systems catalogs and technical brochures

  1. FTP

    20 Pages

  2. EL

    28 Pages

  3. ITP

    44 Pages

  4. TRP

    48 Pages

  5. CR

    20 Pages

  6. TCR

    20 Pages

  7. TRW

    24 Pages

  8. HTR

    2 Pages

  9. FT

    16 Pages

  10. TL

    31 Pages

  11. IT

    27 Pages

  12. TR

    35 Pages

  13. IG

    30 Pages

  14. HP

    16 Pages

  15. MHP

    19 Pages

  16. LHP

    17 Pages

  17. LA

    10 Pages

  18. CU

    20 Pages

  19. CPT

    20 Pages

  20. MUL

    8 Pages

  21. HP-catalogue

    15 Pages

Archived catalogs

  1. LHP-catalogue

    16 Pages

  2. IT-catalogue

    27 Pages

  3. IP-catalogue

    17 Pages

  4. IG-catalogue

    29 Pages