XTS - Magnetic Drive Solids Handling Pump
XTS - Magnetic Drive Solids Handling Pump
- Zero leakage due to magnetic drive execution.
- Reduced installation costs as there are no double mechanical seals or external flushing systems required.
- No process contamination from external flushing fluids in case of double mechanical seal failure.
- Complies with 2006/42/CE.
- Designed according to ISO 2858, ISO 15783, and ATEX 100 Directive 2014/34/EU.
- Flanged according to UNI 1092-2 (ISO 7005-2) PN16RF type B and slotted ANSI 150RF.
- Suitable for dirty liquids, fluids with organic solids, chemical precipitations, and suspensions.
- Internal circulation of liquid and particles ensures cooling and lubrication of bushes.
- Open impeller design minimizes axial thrust and mechanical stress on bushes.
- Two-piece cartridge execution for fast and cost-effective maintenance.
- Bushes are diamond-coated SSIC for optimal circulation and protection against abrasion.
- Isolation shell made of Hastelloy-C to minimize eddy currents, with optional Zirconium Oxide for enhanced abrasion resistance.
- Maximum flow rate: 70 m³/h at 2900 rpm.
- Maximum head: 61 mcl.
- Electric motor range: 0.75 kW to 18.5 kW.
- Temperature range: XTS-B from -40°C to +180°C, XTS from -40°C to +300°C.
- Allowable pressure range up to 16 bar.
- Suction/Delivery options: DN50/DN32 and DN80/DN50.
- Volute casing, pump shaft, and impeller made of AISI 316.
- Isolation shell made of Hastelloy C and AISI 316L.
- Bushing support and thrust bearing made of sintered SSIC.
- Inner and outer magnets made of AISI 316L/SmCo and EN-GJS-400-15/Ryton/NdFeB respectively.
- For further details, visit the website: www.cdrpompe.com.
- Contact: C.D.R. Pompe S.R.L., Via Raffaello Sanzio, 57 - 20021 Bollate (MI) - Italy, Tel. +39029901941, Fax +39029980606, Email: [email protected].
Catalog excerpts
Stainless Steel Magnetic Drive Centrifugal Pumps for suspended solids XTS- B / XTS XTS-B closed coupled Comply to : 2006/42/CE New mag-driven pump suitable for dirty liquids For fluids with organic solids, chemical precipitations and suspensions Flanged UNI 1092-2 (ISO 7005-2 ) PN16RF type B slotted ANSI 150RF XTS bare shaft Stainless Steel Magnetic drive Horizontal - Single Stage - Centrifugal pumps MAIN ADVANTAGES: Zero leakage thanks to magnetic driven execution Reduced cost of installation: no double mechanical seals and external flushing system. No process contamination with external flushing fluid, when double mechanical seals fail
Open the catalog to page 1
Internal circulation of liquid and particles: • Fluid and particles are pressurized by impeller and circulate through the large paths inside the pump; • Fluid circulation assures cooling and lubrication of bushes; • Fluid and particles come back to suction through the central canal in pump shaft. Open impeller: Extremely low axial thrust, resulting in low mechanical solicitations of bushes. Suitable for solid particles. It centrifuge soft particles agglomerates Isolation shell: Executed in Hastelloy-C to minimize eddy-current, minimum thickness 1mm On request, Zirconium Oxyde execution, for top...
Open the catalog to page 2
For further info, please visit: C.D.R. Pompe S.R.L. Via Raffaello Sanzio, 57 - 20021 Bollate (MI) - Italy Tel. +39029901941 www.cdrpompe.com Technical Characteristics The technical data and characteristics stated in this General Catalogue are not binding. CDR Pompe S.r.l. reserves the right to make modifications without notice. Therefore data, dimensions, performances and any other stated issues are indicative only and not binding. TB - XTS 2018
Open the catalog to page 4
